List of 5320 - Rivets Standards

• ANSI-B18.1.1 – RIVET, SMALL SOLID (NO S/S DOCUMENT)
• ANSI-B18.1.2 – RIVET, LARGE (NO S/S DOCUMENT)
• AN470 – RIVET&UNIVERAL HEAD, ALUMINUM ALLOY (USE MS20470)
• AN123151THRUAN123300 – RIVET & UNIVERSAL HEAD, HIGH TEMPERATURE, AMS7229 (S/S BY SAE-AS123151THRUAN123300)
• AN123301THRUAN123450 – RIVET & UNIVERSAL HEAD, HIGH TEMPERATURE, AMS7232 (S/S BY SAE-AS123301THRUAS123450)
• AN123451THRUAN123600 – Rivet and Countersunk Head, High Temperature, AMS 7229 (S/S by SAE-AS123451THRUAS123600)
• AN123601THRUAN123750 – RIVET & COUNTERSUNK HEAD, HIGH TEMPERATURE, AMS7232 (S/S BY SAE-AS123601THRUAS123750)
• AN459 – RIVET – BRAZIER HEAD, BLIND, TYPE A (S/S BY MS20602)
• AN460 – RIVET – 100 DEG. COUNTERSUNK HEAD, BLIND, TYPE B, CLASS 1 (USE NAS1399)
• AN461 – RIVET – BRAZIER HEAD, BLIND, TYPE B, CLASS 1 (USE NAS1398)
• AN462 – RIVET – 100 DEG. COUNTERSUNK HEAD, BLIND, TYPE B, CLASS 2
• AN463 – RIVET & BRAZIER HEAD, BLIND, TYPE B, GLASS 2 (S/S BY MS&20600
• AN458 – RIVET – 100 DEG. COUNTERSUNK HEAD, BLIND, TYPE A (S/S BY MS20603)
• AN435 – RIVET, ROUND HEAD, STEEL, MONEL AND COPPER (USE MS 20613 AND MS 20615)
• AN441 – RIVET – FLAT HEAD (MILD STEEL, MONEL AND COPPER) (USE AN435)
• AN445 – RIVET – FLUSH HEAD,
• AN450 – RIVET, TUBULAR (USE MS 16535 AND MS16536)
• QPL-81177 – FASTENERS, BLIND, HIGH STRENGTH, INSTALLATION FORMED, ALLOY STEEL, GENERAL SPECIFICATION FOR (NO S/S DOCUMENT)
• MIL-HDBK-271/102 – Aircraft Fasteners Installation & Removal Methods for MS14218 120 Deg. Rivets
• AN420 – RIVET & COUNTERSUNK HEAD (SEE AN427)
• AN425 – MS FITTING CLASSIFICATION OF DEFECTS OF
• AN426 – RIVET & SOLID, COUNTERSUNK 100 DEG. PRECISION HEAD, ALUMINUM ALLOY (USE MS20426)
• A-A-59430 – Rivets, Blind, Nonstructural, Retained Mandrel, Closed-End, Domed Head, Aluminum Alloy (Future acquisitions should refer to MIL-R-24243/6)
• A-A-59431 – Rivets, Blind, Nonstructural, Retained Mandrel, Closed-End, 120 Degrees Countersunk Head, Aluminum Alloy (Future acquisitions should refer to MIL-R-24243/7)
• FF-R-556 – Rivet, Solid, Small; Rivet, Split, Small; Rivet, Tubular, Small Flat Washer (Burr); and Cap, Rivet, General Purpose
• QPL-7885 – Rivets: Blind, Structural, Pull-Stem, and Chemically Expanded (No S/S Document)
• QPL-8975 – FASTENERS, BLIND, HIGH STRENGTH, INSTALLATION FORMED, CORROSION RESISTANT STEEL, HEAT RESISTANT STEEL AND TITANIUM GENERAL SPECIFICATION FOR (NO S/S DOCUMENT)
• A-A-59428 – Rivets, Blind, Nonstructural, Retained Mandrel, Open End, 100 Degrees Countersunk Head, Aluminum Alloy (Future acquisitions should refer to MIL-R-24243/4, A-A-59428 and MIL-R-24243/4)
• A-A-59429 – Rivets, Blind, Nonstructural, Retained Mandrel, Open End, 120 Degree Countersunk Head, Aluminum Alloy, Carbon Steel, Nickel-Copper Alloy (Future acquisitions should refer to MIL-R-24243/5)
• A-A-59425 – Rivets, Blind, Nonstructural, Retained Mandrel, Open End, Domed Head, Aluminum Alloy, Carbon Steel, Corrosion Resistant Steel (Future acquisitions should refer to MIL-R-24243/1, A-A-59425 and MIL-R-24243/1)
• A-A-59426 – Rivets, Blind, Nonstructural, Retained Mandrel, Open End, Domed Head, Nickel-Copper Alloy (Future acquisitions should refer to MIL-R-24243/2, A-A-59426 and MIL-R-24243/2)
• A-A-59427 – Rivets, Blind, Nonstructural, Retained Mandrel, Open End, Large Domed Head, Aluminum Alloy, Carbon Steel (Future acquisitions should refer to MIL-R-24243/3, A-A-59427 and MIL-R-24243/3)
• MS51945 – RIVET, SOLID COUNTERSUNK HEAD BRASS OR COPPER
• MS90353 – FASTENER, BLIND, HIGH STRENGTH, PULL TYPE, POSITIVE MECHANICAL LOCK, 100 DEG. FLUSH HEAD, ALLOY STEEL, 112 K.S.I. FSU (S/S BY NASM90353)
• MS90354 – FASTENER, BLIND, HIGH STRENGTH, PULL TYPE, POSITIVE MECHANICAL LOCK, PROTRUDING HEAD, ALLOY STEEL, 112 K.S.I. FSU (S/S BY NASM90354)
• MIL-STD-1759 – RIVETS AND RIVET TYPE FASTENERS PREFERRED FOR DESIGN, LISTING OF (NO S/S DOCUMENT)
• MIL-STD-40007 – RIVETS, SOLID, INSTALLATION OF (NO S/S DOCUMENT)
• MS51499 – Rivet, Tubular, 100 Degree, Countersunk Head (No S/S Document)
• MS51829 – Rivet, Solid, Button Head, Steel
• MS51924 – Cap, Rivet (No S/S Document)
• MS51931 – Rivet, Solid – Tinner S
• MS51942 – Rivet, Tubular – Flat Head
• DS51406 – Rivet, Solid, Countersunk 100 Degree Precision Head, Carbon Steel, Metric  (No S/S Document)
• DS51407 – Rivet, Solid, Universal Head, Copper, Metric
• DS51408 – Rivet, Solid, Countersunk 100 Deg. Precision Head, Copper, Metric
• DS51404 – Rivet, Solid, Universal Head, Brass, Metric
• DS51405 – Rivet, Solid, Universal Head, Carbon Steel, Metric  (No S/S Document)
• MS35743 – Rivet, Solid, Small, Pan Head, Steel, Annealed
• MS35744 – Rivet, Solid-Small Countersunk Head, Steel, Annealed
• MS35745 – Rivet, Solid, Belt
• MS51401 – Rivet, Solid, Tinners
• DS51403 – Rivet, Tubular, Round and Flat Type Head, Metric
• MS24662 – RIVET, BLIND, UNIVERSAL HEAD, DRIVE TYPE (S/S BY NASM24662)
• MS33522 – RIVETS, BLIND, STRUCTURAL, MECHANICALLY LOCKED AND FRICTION RETAINER SPINDLE, (RELIABILITY AND MAINTAINABILITY) DESIGN AND CONSTRUCTION REQUIREMENTS FOR (S/S BY NASM33522)
• MS33557 – NONSTRUCTURAL RIVETS FOR BLIND ATTACHMENT; LIMITATIONS FOR DESIGN AND USAGE (S/S BY NASM33557)
• MS35684 – Rivet, Split, Oval Head, Steel IVET, SPLIT, OVAL HEAD, STEEL
• MS35685 – Rivet, Split, Oval Head, Brass
• MS21141 – Fastener, Blind, High Strength, Pull Type, Positive Mechanical Lock, Protruding Head, Corrosion Resisting Steel, 95 KSI FSU (See Notice 1 for Replacement Information)
• MS21200 – RIVET-BLIND PROTRUDING HEAD LOCKED SPINDLE
• MS21201 – RIVET-BLIND, 100 DEG. FLUSH HEAD LOCKED SPINDLE
• MS24661 – RIVET, BLIND-COUNTERSUNK HEAD, DRIVE TYPE (S/S BY NASM24661)
• MS21140 – FASTENER, BLIND, HIGH STRENGTH, PULL TYPE, POSITIVE MECHANICAL LOCK, 100 DEG. FLUSH HEAD, CORROSION RESISTING STEEL, 95 KSI FSU (S/S BY NASM21140)
• MS20606 – RIVET, BLIND, NONSTRUCTURAL MODIFIED TRUSS HEAD, CLASS 3 (USE MS 20604)
• MS20613 – RIVET, SOLID-UNIVERSAL HEAD, STEEL, CARBON AND STEEL, CORROSION-RESISTANT (S/S BY NASM20613)
• MS20615 – RIVET, SOLID-UNIVERSAL HEAD, BRASS, COPPER, NICKEL-COPPER ALLOY (S/S BY NASM20615)
• MS21000 – Pin – Flathead, HI – Shear, Oversize, 160,000 PSI
• MS21001 – Pin, 100 Deg. Countersunk Head, Hi-Shear, Oversize, 160,000 PSI (No S/S Document)
• MS20601 – RIVET, BLIND, STRUCTURAL PULL STEM, SELF-PLUGGING, 100 DEG. FLUSH HEAD, TYPE II (S/S BY NASM20601)
• MS20602 – RIVET, BLIND, CHEMICALLY EXPANDED, PROTRUDING HEAD, TYPE I, CLASS 1, STYLES A AND B (NO S/S DOCUMENT)
• MS20603 – RIVET, BLIND, CHEMICALLY EXPANDED, 100 DEGREES FLUSH HEAD, TYPE I, CLASS 2, STYLES A AND B ((NO S/S DOCUMENT)
• MS20604 – RIVET, BLIND, NONSTRUCTURAL, UNIVERSAL HEAD, CLASS 1 (S/S BY NASM20604)
• MS20605 – RIVET, BLIND, NONSTRUCTURAL, 100 DEG. FLUSH HEAD, CLASS 2 (S/S BY NASM20605)
• MS20427 – RIVET, SOLID-100 DEG. COUNTERSUNK HEAD, CARBON STEEL, CORROSION-RESISTANT STEEL, MONEL AND COPPER (S/S BY NASM20427)
• MS20435 – RIVET, ROUND HEAD, STEEL, MONEL AND COPPER (S/S BY MS20613 AND MS20615)
• MS20450 – RIVET, TUBULAR (S/S BY MS16535 OR MS16536)
• MS20470 – RIVET, SOLID UNIVERSAL HEAD, ALUMINUM ALLOY AND TITANIUM COLUMBIUM ALLOY (S/S BY NASM20470)
• MS20600 – RIVET, BLIND, STRUCTURAL PULL STEM, SELF-PLUGGING, PROTRUDING HEAD, TYPE II (S/S BY NASM20600)
• MS16535 – RIVET – TUBULAR, OVAL HEAD (S/S BY NASM16535)
• MS16536 – RIVET – TUBULAR, 150 DEG. FLAT COUNTERSUNK HEAD (S/S BY NASM16536)
• MS16593 – RIVET, SOLID, 78 DEGREE FLAT HEAD, ALUMINUM
• MS17312 – Rivet for Safety Chain Type II, Class 6, No. 0
• MS20426 – Rivet, Solid, Countersunk 100 Degree, Precision Head, Aluminum and Titanium Columbium Alloy (S/S by NASM20426)
• MS9319 – RIVET, SOLID – UNIVERSAL HEAD, AMS 7233 (S/S BY SAE-AS9319)
• MS9403 – RIVET, SOLID – UNIVERSAL HEAD, AMS 5737 (S/S BY SAE-AS9403)
• MS9460 – RIVET, SOLID – 100 DEG. FLUSH HEAD, AMS 7235 (S/S BY SAE-AS9460)
• MS14218 – Rivet, Solid, 120 Deg. Flush Interference Shear Head (S/S by NASM14218)
• MS14219 – RIVET, SOLID, 120 DEG. FLUSH INTERFERENCE, TENSION TYPE HEAD (S/S BY NASM14219)
• MIL-P-87988/25 – PIN-RIVET, THREADED, TYPE III (100 DEG. FLUSH CROWN SHEAR HEAD), CLASS 6 (PH13-8 MO CORROSION RESISTANT STEEL, 125 KSI FSU AND 220 KSI FTU) (NO S/S DOCUMENT)
• MIL-P-87988/26 – PIN-RIVET, THREADED, TYPE I (PROTRUDING TENSION HEAD), CLASS 6 (PH13-8 MO CORROSION RESISTANT STEEL, 125 KSI FSU AND 220 KSI FTU) (NO S/S DOCUMENT)
• MIL-P-87988/27 – PIN-RIVET, THREADED, TYPE IV (100 DEG. FLUSH MS20406 SHEAR HEAD, CLASS 6 (PH13-8 MO CORROSION RESISTANT STEEL, 125 KSI FSU AND 220 KSI FTU) (NO S/S DOCUMENT)
• MIL-P-87988/28 – PIN-RIVET, THREADED, TYPE II (100 DEG. FLUSH REDUCED SHEAR HEAD), CLASS 6 (PH13-8 MO CORROSION RESISTANT STEEL, 125 KSI FSU AND 220 KSI FTU) (NO S/S DOCUMENT)
• MS9318 – RIVET, SOLID-100 DEG. FLUSH HEAD, AMS 7233 (S/S BY SAE-AS9318)
• MIL-P-87988/24 – PIN-RIVET, THREADED, TYPE V (100 DEGREE FLUSH MS24694 TENSION HEAD), CLASS 6 (PH13-8 MO CORROSION RESISTANT STEEL, 125 KSI FSU AND 220 KSI FTU) (NO S/S DOCUMENT)
• MIL-P-87988/20 – PIN-RIVET, THREADED, TYPE IV (100 DEG. FLUSH MS20426 SHEAR HEAD), CLASS 5 (ALLOY STEEL, 108 KSI FSU AND 180-200 KSI FTU) (NO S/S DOCUMENT)
• MIL-P-87988/21 – PIN-RIVET, THREADED, TYPE III (100 DEG. FLUSH CROWN SHEAR HEAD), CLASS 5 (ALLOY STEEL, 108 KSI FSU AND 180-120 KSI FTU) (NO S/S DOCUMENT)
• MIL-P-87988/22 – PIN-RIVET, THREADED, TYPE V (100 DEG. FLUSH MS24694 TENSION HEAD), CLASS 5 (ALLOY STEEL, 108 KSI FSU AND 180-200 KSI FTU) (NO S/S DOCUMENT)
• MIL-P-87988/23 – PIN-RIVET, THREADED, TYPE I (100 DEGREE (PROTRUDING TENSION HEAD), CLASS 5 (ALLOY STEEL, 108 KSI FSU AND 180-200 KSI FTU) (NO S/S DOCUMENT)
• MIL-P-87988/15 – PIN-RIVET, THREADED, TYPE I (PROTRUDING TENSION HEAD), CLASS 4 (A-286 HIGH TEMPERATURE ALLOY, 95-115 KSI FSU AND 160 KSI FTU) (NO S/S DOCUMENT)
• MIL-P-87988/16 – PIN-RIVET, THREADED, TYPE V (100 DEG. FLUSH MS24694 TENSION HEAD), CLASS 4 (A-286 HIGH TEMPERATURE ALLOY, 95-115 KSI FSU AND 160 KSI FTU) (NO S/S DOCUMENT)
• MIL-P-87988/17 – PIN-RIVET, THREADED, TYPE III (100 DEG. FLUSH CROWN SHEAR HEAD), CLASS 4 (A-286 HIGH TEMPERATURE ALLOY, 95-115 KSI FSU AND 160 KSI FTU) (NO S/S DOCUMENT)

Previous234Next