List of 4730 - Hose, Pipe, Tube, Lubrication, and Railing Fittings Standards

• ASME-B16.24 – Flanges, Cast Copper Alloy Pipe, and Flanged Fittings Class 150, 300, 400, 600, 900, 1500 and 2500
• ASME-B16.25 – End, Buttwelding
• ASME-B16.29 – Fitting – DWY, Wrought Copper and Wrought Copper Alloy Solder Joint Drainage
• ANSI-Z21.41 – GAS FUEL, FOR USE WITH QUICK-DISCONNECT DEVICES
• ASME-B16.1 – Pipe, Cast Iron, Flanges and Flanged Fittings
• ASME-B16.3 – Fitting, Malleable Iron Threaded (Classes 150 AD 300)
• ASME-B16.4 – Fitting, Cast Iron Threaded Fittings, Classes 125, American National Standard
• ASME-B16.5 – Pipe Flanges and Flanged Fittings NPS 1/2 Through NPS 24 Metric/Inch
• ASME-B16.9 – Fittings, Steel Buttwelding, Factory-Made Wrought
• ASME-B16.11 – Fittings, Forged, Socket-Welding and Threaded
• ASME-B16.14 – Ferrous Type Plugs, Bushings, and Lock Nuts with Pipe Threads, Standard for
• ASME-B16.15 – Fitting, Cast Bronze Threaded, Standard for
• ASME-B16.22 – Wrought Copper and Copper Alloy Solder Joint Pressure Fittings
• ANSI-B16.12 – Fittings, Drainage, Cast Iron Threaded
• ANSI-B16.18 – Fittings, Cast Copper Alloy Solder Joint Pressure
• AND10071 – Boss and Installations – Air Connection (AN6287)
• AND10077 – FITTING END, STANDARD DIMENSIONS FOR TAPER PIPE THREAD (FOR USE ON AN STANDARD PARTS) (S/S BY MS33677)
• AND10078 – TUBING END, STANDARD DIMENSIONS FOR DOUBLE FLARE (S/S BY MS33583)
• AND10086 – FITTING INSTALLATION – FLARED TUBE AND HOSE, SWIVEL (S/S BY MS33786)
• AND10089 – Fitting End, Design Standard for Cone Connection
• AGMA904 – Metric Usage
• ANSI-A21.14 – GAS, DUCTILE-IRON FITTINGS 3-INCH THROUGH 24-INCH, STANDARD FOR (NO S/S DOCUMENT)
• USAS-B2.4 – Hose Couplings Screw Threads (See Notice of Withdrawal for Replacement Information)
• AND10053 – BOSS, PIPE-THREAD, INTERNAL-STANDARD DIENSIONS FOR
• AND10056 – FITTING END, STANDARD DIMENSIONS FOR FLARED TUBE CONNECTION AND GASKET SEAL (S/S BY MS33656)
• AND10057 – FITTING END, STANDARD DIMENSIONS FOR BULKHEAD FLARED TUBE CONNECTIONS (S/S BY MS33657)
• AND10058 – FITTING END – HOSE CONNECTION, STANDARD DIMENSIONS FOR (S/S BY MS33658)
• AND10059 – Fittings – Styles of Pipe Threaded, Flared Tube and Hose
• AND10060 – TUBING END, HOSE CONNECTION, STANDARD DIMENSIONS FOR (S/S BY MS33660)
• AND10061 – TUBING END, STANDARD DIMENSIONS FOR FLARED (S/S BY MS33584)
• AND10070 – ADAPTER – OXYGEN FILLER (S/S BY AN6027)
• AND10050 – Bosses, Standard Dimensions for Gasket Seal Straight Thread
• AND10052 – BOSSES – STANDARD DIMENSIONS FOR EXTERNAL PIPE THREAD (S/S BY SAE-AS5201)
• AN6224 – NUT & HYDRAULIC SELF SEALING COUPLING
• AN6241 – COUPLING ASSEMBLY & HYDRAULIC SELF SEALING (GASKET SEAL AND BULKHEAD FITTING END)
• AN6242 – COUPLING ASSEMBLY & HYDRAULIC SELF SEALING (GASKET SEAL AND BULKHEAD FITTING END WITH FLANGE)
• AN6243 – COUPLING ASSEMBLY & HYDRAULIC SELF SEALING (GASKET SEAL AND UNIVERSAL FITTING END)
• AN6271 – HOSE ASSEMBLY & HYDRAULIC AND PNEUMATIC, DETACHABLE END FITTING TYPE, SWIVEL FITTINGS, FOR AN&H&24 HOSE (S/S BY MS28741)
• AN6285 – ADAPTER, AIR PRESSURE GAGE (S/S BY SAE-AS5166 AND SAE-AS5167)
• AN6289 – Nut, Tube (S/S by SAE-AS5179)
• AN6532 – CONNECTOR, HOSE, QUICK DISCONNECT, FEMALE, ANTI, G SUIT (USE MS 27755)
• AN7023 – CONNECTOR-VACUUM HOSE (NO S/S DOCUMENT)
• AN8019 – Tee and Flyer’s Relief Tube
• AN6220 – COUPLING HALF & HYDRAULIC SELF SEALING (BULKHEAD FITTING END)
• AN6221 – COUPLING HALF & HYDRAULIC SELF SEALING (GASKET SEAL FITTING)
• AN6222 – COUPLING HALF & HYDRAULIC SELF SEALING (SWIVEL TYPE)
• AN6223 – Flange – Hydraulic Self Sealing Coupling (No S/S Document)
• AN4053 – CONNECTION & ENGINE OIL 45 DEG. (4 BOLT FLANGES) (SUPERSEDES USAF DWG 4489739) (S/S BY MS&28749)
• AN4111 – CONNECTION – ENGINE OIL 90 DEG. (4 BOLT FLANGE)
• AN4160 – FLANGE & OIL CONNECTION, 3 BOLT
• AN4161 – FLANGE & OIL CONNECTION, 4 BOLT
• AN4162 – FLANGE & HOSE CONNECTION
• AN6027 – Coupling Half, Quick Disconnect
• AN937 – CROSS, TUBE, INTERNAL THREAD (S/S BY SAE-AS5193)
• AN938 – Tee, Tube, Internal Thread (S/S by SAE-AS5192)
• AN939 – Elbow, Tube, Internal Thread, 90 Degrees (S/S by SAE-AS5190)
• AN941 – ELBOW, TUBE, INTERNAL THREAD, 45 DEG. (S/S BY SAE-AS5191)
• AN944 – FITTING-LUBRICATOR, AIRCRAFT PRESSURE GRIP, TYPE NFT (USE MS-15001 AND MS-15002
• AN2555 – NOZZLE AND AIRCRAFT FUELING (NO S/S DOCUMENT)
• AN4022 – NIPPLE ASSEMBLY – PRIMING SYSTEM JET
• AN4023 – ELBOW ASSEMBLY & PRIMING SYSTEM JET
• AN4024 – TEE ASSEMBLY & PRIMING SYSTEM JET
• AN4049 – CONNECTION – STRAIGHT (4 BOLT FLANGE) ENGINE OIL (USE MS28748)
• AN917/2 – TEE, PIPE (NO S/S DOCUMENT)
• AN918 – Cross, Pipe
• AN919 – Reducer – External Thread Flared Tube (See Notice 3 for Replacement Information)
• AN924 – Nut, Tube, Bulkhead and Universal Fitting (For new design, use SAE-AS5178)
• AN926 – TEE – INTERNAL SCREW THREAD (S/S BY AN938)
• AN927 – ELBOW – INTERNAL SCREW THREAD (S/S BY AN939)
• AN928 – ELBOW – INTERNAL SCREW THREAD 45 DEG. (S/S BY AN941)
• AN929 – Cap Insert, Assembly, Pressure Seal, Flared Tube Fitting
• AN932 – PLUG, PIPE, COUNTERSINK HEX HEAD (USE MS 27769
• AN933 – PLUG, PIPE, HEX HEAD (S/S BY SAE-AS4862)
• AN912 – Bushing, Pipe
• AN913 – PLUG, SQUARE HEAD PIPE THREAD (USE MS-20913)
• AN914 – Elbow, Pipe, Internal and External Thread, 90 Degrees (For New Design, Use SAE-AS4854)
• AN915 – Elbow, Pipe, 45 Degrees
• AN916 – Elbow, Pipe, Internal Thread, 90 Degrees
• AN917 – Tee, Pipe
• AN908 – Plug – Square Head, Drilled for Locking
• AN909 – PLUG & SQUARE HEAD, DRILLED FOR LOCKING
• AN910 – Coupling, Pipe
• AN911 – Nipple, Pipe
• AN870 – Flange and Straight Threads and Welding (No S/S Document)
• AN871 – FLANGE AND STRAIGHT THREAD BOSS WELDING (S/S BY SAE-AS5227)
• AN872 – FLANGE & CIRCULAR FORMATION LIGHT MOUNTING
• AN876 – COLLAR AND TUBING END HOSE CONNECTION (NO S/S DOCUMENT)
• AN891 – CROSS & PRIMER AND GAUGE
• AN892 – Elbow and Hose, Oil Drain
• AN893 – BUSHING SCREW THREAD REDUCER (S/S BY SAE-AS5172)
• AN894 – Bushing, Screw Thread, Expander (S/S by SAE-AS5173)
• AN906 – PLUG & SQ. HD. DRILLED FOR LOCKING & TAPPED
• AN907 – Plug and Square Head, Drilled for Locking
• AN868 – Flange and Straight Threads and Welding (No S/S Document)
• AN869 – Flange and Straight Threads and Riveting (No S/S Document)
• AN842 – Elbow – Pipe to Hose, 90 Degrees
• AN844 – Elbow – Pipe to Hose, 45 Degree
• AN846 – Elbow, Hose, 45 Degree
• AN848 – Elbow, Hose, 90 Degree
• AN849 – Nipple, Hose

Previous456Next