List of Resilient Floor Covering Standards

• ASTM F970 – Standard Test Method for Measuring Recovery Properties of Floor Coverings after Static Loading
• ASTM F924 – Standard Test Method for Resistance to Puncture of Cushioned Resilient Floor Coverings
• ASTM F925 – Standard Test Method for Resistance to Chemicals of Resilient Flooring
• ASTM F710 – Standard Practice for Preparing Concrete Floors to Receive Resilient Flooring
• ASTM F693 – Standard Practice for Sealing Seams of Resilient Sheet Flooring Products by Use of Liquid Seam Sealers
• ASTM F540 – Standard Test Method for Squareness of Resilient Floor Tile by Dial Gage Method (Withdrawn 2004)
• ASTM F536 – Standard Test Method for Size of Resilient Floor Tile by Dial Gage Method (Withdrawn 2004)
• ASTM F510/F510M – Standard Test Method for Resistance to Abrasion of Resilient Floor Coverings Using an Abrader with a Grit Feed Method
• ASTM F511 – Standard Test Method for Quality of Cut (Joint Tightness) of Resilient Floor Tile
• ASTM F410 – Standard Test Method for Wear Layer Thickness of Resilient Floor Coverings by Optical Measurement
• ASTM F373 – Standard Test Method for Embossed Depth of Resilient Floor Coverings
• ASTM F386 – Standard Test Method for Thickness of Resilient Flooring Materials Having Flat Surfaces
• ASTM F387 – Standard Test Method for Measuring Thickness of Resilient Floor Covering With Foam Layer
• ASTM F3403 – Standard Specification for Heterogeneous Polyurethane Sheet Flooring
• ASTM F3404 – Standard Specification for Heterogeneous Polyurethane Tile or Plank Flooring
• ASTM F3414 – Standard Test Method for Determining Ortho-Phthalate Concentration in Flooring Containing Polyvinyl Chloride
• ASTM F3311 – Standard Practice for Mat Bond Evaluation of Performance and Compatibility for Resilient Flooring System Components Prior to Installation
• ASTM F3261 – Standard Specification for Resilient Flooring in Modular Format with Rigid Polymeric Core
• ASTM F3191 – Standard Practice for Field Determination of Substrate Water Absorption (Porosity) for Substrates to Receive Resilient Flooring
• ASTM F3041 – Standard Specification for Bonded Rubber Crumb Floor Coverings
• ASTM F3009 – Standard Specification for Polyolefin Composition Floor Tile
• ASTM F3010 – Standard Practice for Two-Component Resin Based Membrane-Forming Moisture Mitigation Systems for Use Under Resilient Floor Coverings
• ASTM F3008 – Standard Specification for Cork Floor Tile
• ASTM F2982 – Standard Specification for Polyester Composition Floor Tile
• ASTM F2873 – Standard Practice for the Installation of Self-Leveling Underlayment and the Preparation of Surface to Receive Resilient Flooring
• ASTM F2753 – Standard Practice to Evaluate the Effect of Dynamic Rolling Load over Resilient Floor Covering System
• ASTM F2659 – Standard Guide for Preliminary Evaluation of Comparative Moisture Condition of Concrete, Gypsum Cement and Other Floor Slabs and Screeds Using a Non-Destructive Electronic Moisture Meter
• ASTM F2678 – Standard Practice for Preparing Panel Underlayments, Thick Poured Gypsum Concrete Underlayments, Thick Poured Lightweight Cellular Concrete Underlayments, and Concrete Subfloors with Underlayment Patching Compounds to Receive Resilient Flooring
• ASTM F2471 – Standard Practice for Installation of Thick Poured Lightweight Cellular Concrete Underlayments and Preparation of the Surface to Receive Resilient Flooring
• ASTM F2420 – Standard Test Method for Determining Relative Humidity on the Surface of Concrete Floor Slabs Using Relative Humidity Probe Measurement and Insulated Hood (Withdrawn 2014)
• ASTM F2421 – Standard Test Method for Measurement of Resilient Floor Plank by Dial Gauge
• ASTM F2419 – Standard Practice for Installation of Thick Poured Gypsum Concrete Underlayments and Preparation of the Surface to Receive Resilient Flooring
• ASTM F2195 – Standard Specification for Linoleum Floor Tile
• ASTM F2199 – Standard Test Method for Determining Dimensional Stability and Curling Properties of Resilient Flooring after Exposure to Heat
• ASTM F2169 – Standard Specification for Resilient Stair Treads
• ASTM F2170 – Standard Test Method for Determining Relative Humidity in Concrete Floor Slabs Using in situ Probes
• ASTM F2055 – Standard Test Method for Size and Squareness of Resilient Floor Tile by Dial Gauge Method
• ASTM F2034 – Standard Specification for Sheet Linoleum Floor Covering
• ASTM F1913 – Standard Specification for Vinyl Sheet Floor Covering Without Backing
• ASTM F1914 – Standard Test Methods for Short-Term Indentation and Residual Indentation of Resilient Floor Covering
• ASTM F1859 – Standard Specification for Rubber Sheet Floor Covering Without Backing
• ASTM F1860 – Standard Specification for Rubber Sheet Floor Covering With Backing
• ASTM F1861 – Standard Specification for Resilient Wall Base
• ASTM F1869 – Standard Test Method for Measuring Moisture Vapor Emission Rate of Concrete Subfloor Using Anhydrous Calcium Chloride
• ASTM F1700 – Standard Specification for Solid Vinyl Floor Tile
• ASTM F1514 – Standard Test Method for Measuring Heat Stability of Resilient Flooring by Color Change
• ASTM F1515 – Standard Test Method for Measuring Light Stability of Resilient Flooring by Color Change
• ASTM F1516 – Standard Practice for Sealing Seams of Resilient Flooring Products by the Heat Weld Method (when Recommended)
• ASTM F150 – Standard Test Method for Electrical Resistance of Conductive and Static Dissipative Resilient Flooring
• ASTM F1482 – Standard Practice for Installation and Preparation of Panel Type Underlayments to Receive Resilient Flooring
• ASTM F141 – Standard Terminology Relating to Resilient Floor Coverings
• ASTM F137 – Standard Test Method for Flexibility of Resilient Flooring Materials with Cylindrical Mandrel Apparatus
• ASTM F1344 – Standard Specification for Rubber Floor Tile
• ASTM F1304 – Standard Test Method for Deflection of Resilient Floor Tile
• ASTM F1289 – Practice for Development of Literature Pertaining to the Selection of Residential Resilient Floor Coverings (Withdrawn 2000)
• ASTM F1303 – Standard Specification for Sheet Vinyl Floor Covering with Backing
• ASTM F1265 – Standard Test Method for Resistance to Impact for Resilient Floor Tile
• ASTM F1066 – Standard Specification for Vinyl Composition Floor Tile
• ASTM F1037 – Standard Test Method for Visual Rating of Appearance of Resilient Floors
• ASTM E1907 – Standard Guide to Methods of Evaluating Moisture Conditions of Concrete Floors to Receive Resilient Floor Coverings (Withdrawn 2008)