List of Physical Testing and Mechanical Testing Standards

• ASTM E975 – Standard Practice for X-Ray Determination of Retained Austenite in Steel with Near Random Crystallographic Orientation (Withdrawn 2022)
• ASTM E986 – Standard Practice for Scanning Electron Microscope Beam Size Characterization
• ASTM E963 – Standard Practice for Electrolytic Extraction of Phases from Ni and Ni-Fe Base Superalloys Using a Hydrochloric-Methanol Electrolyte (Withdrawn 2018)
• ASTM E92 – Standard Test Method for Vickers Hardness of Metallic Materials (Withdrawn 2010)
• ASTM E930 – Standard Test Methods for Estimating the Largest Grain Observed in a Metallographic Section (ALA Grain Size)
• ASTM E915 – Standard Practice for Verifying the Alignment of X-Ray Diffraction Instruments for Residual Stress Measurement
• ASTM E92 – Standard Test Methods for Vickers Hardness and Knoop Hardness of Metallic Materials
• ASTM E883 – Standard Guide for Reflected–Light Photomicrography
• ASTM E855 – Standard Test Methods for Bend Testing of Metallic Flat Materials for Spring Applications Involving Static Loading
• ASTM E83 – Standard Practice for Verification and Classification of Extensometer Systems
• ASTM E837 – Standard Test Method for Determining Residual Stresses by the Hole-Drilling Strain-Gage Method
• ASTM E82/E82M – Standard Test Method for Determining the Orientation of a Metal Crystal
• ASTM E81 – Standard Test Method for Preparing Quantitative Pole Figures
• ASTM E796 – Standard Test Method for Ductility Testing of Metallic Foil (Withdrawn 2009)
• ASTM E766 – Standard Practice for Calibrating the Magnification of a Scanning Electron Microscope
• ASTM E768 – Standard Guide for Preparing and Evaluating Specimens for Automatic Inclusion Assessment of Steel
• ASTM E74 – Standard Practices for Calibration and Verification for Force-Measuring Instruments
• ASTM E643 – Standard Test Method for Ball Punch Deformation of Metallic Sheet Material
• ASTM E646 – Standard Test Method for Tensile Strain-Hardening Exponents (n -Values) of Metallic Sheet Materials
• ASTM E604 – Standard Test Method for Dynamic Tear Testing of Metallic Materials
• ASTM E6 – Standard Terminology Relating to Methods of Mechanical Testing
• ASTM E562 – Standard Test Method for Determining Volume Fraction by Systematic Manual Point Count
• ASTM E517 – Standard Test Method for Plastic Strain Ratio r for Sheet Metal
• ASTM E436 – Standard Test Method for Drop-Weight Tear Tests of Ferritic Steels
• ASTM E448 – Standard Practice for Scleroscope Hardness Testing of Metallic Materials (Withdrawn 2017)
• ASTM E45 – Standard Test Methods for Determining the Inclusion Content of Steel
• ASTM E407 – Standard Practice for Microetching Metals and Alloys
• ASTM E4 – Standard Practices for Force Calibration and Verification of Testing Machines
• ASTM E381 – Standard Method of Macroetch Testing Steel Bars, Billets, Blooms, and Forgings
• ASTM E384 – Standard Test Method for Microindentation Hardness of Materials
• ASTM E340 – Standard Practice for Macroetching Metals and Alloys
• ASTM E3246 – Standard Test Methods for Differential Indentation Depth Hardness of Metallic Materials
• ASTM E3 – Standard Guide for Preparation of Metallographic Specimens
• ASTM E290 – Standard Test Methods for Bend Testing of Material for Ductility
• ASTM E2860 – Standard Test Method for Residual Stress Measurement by X-Ray Diffraction for Bearing Steels
• ASTM E2712 – Standard Test Methods for Bulge-Forming Superplastic Metallic Sheet
• ASTM E2658 – Standard Practices for Verification of Speed for Material Testing Machines
• ASTM E2624 – Standard Practice for Torque Calibration of Testing Machines
• ASTM E2627 – Standard Practice for Determining Average Grain Size Using Electron Backscatter Diffraction (EBSD) in Fully Recrystallized Polycrystalline Materials
• ASTM E2567 – Standard Test Method for Determining Nodularity And Nodule Count In Ductile Iron Using Image Analysis
• ASTM E2546 – Standard Practice for Instrumented Indentation Testing
• ASTM E251 – Standard Test Methods for Performance Characteristics of Metallic Bonded Resistance Strain Gages
• ASTM E2492 – Standard Test Method for Evaluating Springback of Sheet Metal Using the Demeri Split Ring Test (Withdrawn 2017)
• ASTM E2448 – Standard Test Method for Determining the Superplastic Properties of Metallic Sheet Materials
• ASTM E2428 – Standard Practice for Calibration and Verification of Torque Transducers
• ASTM E23 – Standard Test Methods for Notched Bar Impact Testing of Metallic Materials
• ASTM E2283 – Standard Practice for Extreme Value Analysis of Nonmetallic Inclusions in Steel and Other Microstructural Features
• ASTM E2298 – Standard Test Method for Instrumented Impact Testing of Metallic Materials
• ASTM E2309/E2309M – Standard Practices for Verification of Displacement Measuring Systems and Devices Used in Material Testing Machines
• ASTM E2248 – Standard Test Method for Impact Testing of Miniaturized Charpy V-notch Specimens
• ASTM E2218 – Standard Test Method for Determining Forming Limit Curves
• ASTM E2142 – Standard Test Methods for Rating and Classifying Inclusions in Steel Using the Scanning Electron Microscope
• ASTM E2109 – Standard Test Methods for Determining Area Percentage Porosity in Thermal Sprayed Coatings
• ASTM E208 – Standard Test Method for Conducting Drop-Weight Test to Determine Nil-Ductility Transition Temperature of Ferritic Steels
• ASTM E2014 – Standard Guide on Metallographic Laboratory Safety
• ASTM E2015 – Standard Guide for Preparation of Plastics and Polymeric Specimens for Microstructural Examination
• ASTM E1949 – Standard Test Method for Ambient Temperature Fatigue Life of Metallic Bonded Resistance Strain Gages
• ASTM E1951 – Standard Guide for Calibrating Reticles and Light Microscope Magnifications
• ASTM E1920 – Standard Guide for Metallographic Preparation of Thermal Sprayed Coatings
• ASTM E1928 – Standard Practice for Estimating the Approximate Residual Circumferential Stress in Straight Thin-walled Tubing
• ASTM E190 – Standard Test Method for Guided Bend Test for Ductility of Welds
• ASTM E1856 – Standard Guide for Evaluating Computerized Data Acquisition Systems Used to Acquire Data from Universal Testing Machines
• ASTM E1842 – Standard Test Method for Macro-Rockwell Hardness Testing of Metallic Materials (Withdrawn 2002)
• ASTM E18 – Standard Test Methods for Rockwell Hardness of Metallic Materials
• ASTM E1685 – Standard Practice for Measuring the Change in Length of Bolts Using the Ultrasonic Pulse-Echo Technique
• ASTM E1544 – Standard Practice for Construction of a Stepped Block and Its Use to Estimate Errors Produced by Speed-of-Sound Measurement Systems for Use on Solids (Withdrawn 2012)
• ASTM E1558 – Standard Guide for Electrolytic Polishing of Metallographic Specimens
• ASTM E1561 – Standard Practice for Analysis of Strain Gage Rosette Data
• ASTM E1508 – Standard Guide for Quantitative Analysis by Energy-Dispersive Spectroscopy
• ASTM E1426 – Standard Test Method for Determining the X-Ray Elastic Constants for Use in the Measurement of Residual Stress Using X-Ray Diffraction Techniques
• ASTM E140 – Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, Scleroscope Hardness, and Leeb Hardness
• ASTM E1382 – Standard Test Methods for Determining Average Grain Size Using Semiautomatic and Automatic Image Analysis
• ASTM E1351 – Standard Practice for Production and Evaluation of Field Metallographic Replicas
• ASTM E1319 – Standard Guide for High-Temperature Static Strain Measurement
• ASTM E1268 – Standard Practice for Assessing the Degree of Banding or Orientation of Microstructures
• ASTM E1271 – Standard Practice for Qualifying Charpy Verification Specimens of Heat-Treated Steel (Withdrawn 2003)
• ASTM E1236 – Standard Practice for Qualifying Charpy Impact Machines as Reference Machines (Withdrawn 2006)
• ASTM E1237 – Standard Guide for Installing Bonded Resistance Strain Gages
• ASTM E1245 – Standard Practice for Determining the Inclusion or Second-Phase Constituent Content of Metals by Automatic Image Analysis
• ASTM E1180 – Standard Practice for Preparing Sulfur Prints for Macrostructural Evaluation
• ASTM E1181 – Standard Test Methods for Characterizing Duplex Grain Sizes
• ASTM E1182 – Standard Test Method for Measurement of Surface Layer Thickness by Radial Sectioning (Withdrawn 2002)
• ASTM E112 – Standard Test Methods for Determining Average Grain Size
• ASTM E1122 – Standard Practice for Obtaining JK Inclusion Ratings Using Automatic Image Analysis (Withdrawn 2006)
• ASTM E110 – Standard Test Method for Rockwell and Brinell Hardness of Metallic Materials by Portable Hardness Testers
• ASTM E1077 – Standard Test Methods for Estimating the Depth of Decarburization of Steel Specimens
• ASTM E103 – Standard Practice for Rapid Indentation Hardness Testing of Metallic Materials
• ASTM E1012 – Standard Practice for Verification of Testing Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application
• ASTM E10 – Standard Test Method for Brinell Hardness of Metallic Materials