List of Industrial Chemical Standards

• ASTM E918 – Standard Practice for Determining Limits of Flammability of Chemicals at Elevated Temperature and Pressure
• ASTM E806 – Standard Test Method for Carbon Tetrachloride and Chloroform in Liquid Chlorine by Direct Injection (Gas Chromatographic Procedure)
• ASTM E789 – Standard Test Method for Dust Explosions in a 1.2-Litre Closed Cylindrical Vessel (Withdrawn 2007)
• ASTM E771 – Standard Test Method for Spontaneous Heating Tendency of Materials (Withdrawn 2001)
• ASTM E70 – Standard Test Method for pH of Aqueous Solutions With the Glass Electrode
• ASTM E680 – Standard Test Method for Drop Weight Impact Sensitivity of Solid-Phase Hazardous Materials
• ASTM E681 – Standard Test Method for Concentration Limits of Flammability of Chemicals (Vapors and Gases)
• ASTM E649 – Standard Test Method for Bromine in Chlorine
• ASTM E659 – Standard Test Method for Autoignition Temperature of Chemicals
• ASTM E611 – Standard Test Methods for Low Concentrations of Diethlyene Glycol in Ethylene Glycol by Gas Chromatography (Withdrawn 2020)
• ASTM E582 – Standard Test Method for Minimum Ignition Energy and Quenching Distance in Gaseous Mixtures
• ASTM E534 – Standard Test Methods for Chemical Analysis of Sodium Chloride
• ASTM E537 – Standard Test Method for Thermal Stability of Chemicals by Differential Scanning Calorimetry
• ASTM E538 – Standard Test Methods for Mercury in Caustic Soda (Sodium Hydroxide) and Caustic Potash (Potassium Hydroxide)
• ASTM E502 – Standard Test Method for Selection and Use of ASTM Standards for the Determination of Flash Point of Chemicals by Closed Cup Methods
• ASTM E506 – Standard Test Method for Mercury in Liquid Chlorine
• ASTM E476 – Standard Test Method for Thermal Instability of Confined Condensed Phase Systems (Confinement Test) (Withdrawn 2008)
• ASTM E487 – Standard Test Methods for Constant-Temperature Stability of Chemical Materials
• ASTM E475 – Standard Test Method for Assay of Di-tert-Butyl Peroxide Using Gas Chromatography
• ASTM E449 – Standard Test Methods for Analysis of Calcium Chloride
• ASTM E410 – Standard Test Method for Moisture and Residue in Liquid Chlorine
• ASTM E411 – Standard Test Method for Trace Quantities of Carbonyl Compounds with 2,4-Dinitrophenylhydrazine
• ASTM E394 – Standard Test Method for Iron in Trace Quantities Using the 1,10-Phenanthroline Method
• ASTM E359 – Standard Test Methods for Analysis of Soda Ash (Sodium Carbonate)
• ASTM E324 – Standard Test Method for Relative Initial and Final Melting Points and the Melting Range of Organic Chemicals
• ASTM E299 – Standard Test Method for Trace Amounts of Peroxides In Organic Solvents
• ASTM E298 – Standard Test Methods for Assay of Organic Peroxides
• ASTM E2931 – Standard Test Method for Limiting Oxygen (Oxidant) Concentration of Combustible Dust Clouds
• ASTM E291 – Standard Test Methods for Chemical Analysis of Caustic Soda and Caustic Potash (Sodium Hydroxide and Potassium Hydroxide)
• ASTM E2679 – Standard Test Method for Acidity in Mono-, Di-, Tri- and Tetraethylene Glycol by Non-Aqueous Potentiometric Titration
• ASTM E2680 – Standard Test Method for Appearance of Clear, Transparent Liquids (Visual Inspection Procedure)
• ASTM E2664 – Standard Practice for Methanol Wall Wash of Marine Vessels Handling Polyester Grade Monoethylene Glycol
• ASTM E258 – Standard Test Method for Total Nitrogen in Organic Materials by Modified Kjeldahl Method (Withdrawn 2019)
• ASTM E2470 – Standard Specification for Polyester Grade Ethylene Glycol
• ASTM E2469 – Standard Test Method for Chloride in Mono-, Di- and Tri-ethylene Glycol by Ion Chromatography
• ASTM E2409 – Standard Test Method for Glycol Impurities in Mono-, Di-, Tri- and Tetraethylene Glycol and in Mono- and Dipropylene Glycol(Gas Chromatographic Method)
• ASTM E2313 – Standard Test Method for Aldehydes in Mono-, Di-, and Triethylene Glycol (using Spectrophotometry)
• ASTM E222 – Standard Test Methods for Hydroxyl Groups Using Acetic Anhydride Acetylation
• ASTM E223 – Standard Test Methods for Analysis of Sulfuric Acid
• ASTM E224 – Standard Test Methods for Analysis of Hydrochloric Acid
• ASTM E2193 – Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (using Ultraviolet Spectrophotometry)
• ASTM E2079 – Standard Test Methods for Limiting Oxygen (Oxidant) Concentration in Gases and Vapors
• ASTM E2046 – Standard Test Method for Reaction Induction Time by Thermal Analysis
• ASTM E2021 – Standard Test Method for Hot-Surface Ignition Temperature of Dust Layers
• ASTM E202 – Standard Test Methods for Analysis of Ethylene Glycols and Propylene Glycols
• ASTM E203 – Standard Test Method for Water Using Volumetric Karl Fischer Titration
• ASTM E2036 – Standard Test Method for Nitrogen Trichloride in Liquid Chlorine by High Performance Liquid Chromatography (HPLC)
• ASTM E2037 – Standard Test Method for Bromine Chloride in Liquid Chlorine by High Performance Liquid Chromatography (HPLC)
• ASTM E2012 – Standard Guide for the Preparation of a Binary Chemical Compatibility Chart
• ASTM E2019 – Standard Test Method for Minimum Ignition Energy of a Dust Cloud in Air
• ASTM E200 – Standard Practice for Preparation, Standardization, and Storage of Standard and Reagent Solutions for Chemical Analysis
• ASTM E1981 – Standard Guide for Assessing Thermal Stability of Materials by Methods of Accelerating Rate Calorimetry
• ASTM E1899 – Standard Test Method for Hydroxyl Groups Using Reaction with p-Toluenesulfonyl Isocyanate (TSI) and Potentiometric Titration with Tetrabutylammonium Hydroxide
• ASTM E1863 – Standard Test Method for Analysis of Acrylonitrile by Gas Chromatography
• ASTM E1786 – Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine by On-Line Infrared Spectrophotometry
• ASTM E1787 – Standard Test Method for Anions in Caustic Soda and Caustic Potash (Sodium Hydroxide and Potassium Hydroxide) by Ion Chromatography
• ASTM E1788 – Standard Test Method for Acidity in Acrylonitrile (Withdrawn 2022)
• ASTM E1754 – Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine By Infrared Spectrophotometry
• ASTM E1746 – Standard Test Method for Sampling and Analysis of Liquid Chlorine for Gaseous Impurities
• ASTM E1615 – Standard Test Method for Determination of Trace Quantities of Iron by Visible Spectrophotometry
• ASTM E1584 – Standard Test Method for Assay of Nitric Acid
• ASTM E1515 – Standard Test Method for Minimum Explosible Concentration of Combustible Dusts
• ASTM E1491 – Standard Test Method for Minimum Autoignition Temperature of Dust Clouds
• ASTM E1445 – Standard Terminology Relating to Hazard Potential of Chemicals
• ASTM E1231 – Standard Practice for Calculation of Hazard Potential Figures of Merit for Thermally Unstable Materials
• ASTM E1232 – Standard Test Method for Temperature Limit of Flammability of Chemicals
• ASTM E1226 – Standard Test Method for Explosibility of Dust Clouds
• ASTM E1228 – Standard Test Method for Assay of Peroxy Esters—Catalyzed Iodometric Procedure
• ASTM E1229 – Standard Specification for Calcium Hypochlorite
• ASTM E1177 – Standard Specification for Engine Coolant Grade Glycol
• ASTM E1146 – Standard Specification for Muriatic Acid (Technical Grade Hydrochloric Acid)
• ASTM E1120 – Standard Specification for Liquid Chlorine
• ASTM E1119 – Standard Specification for Industrial Grade Ethylene Glycol
• ASTM E1064 – Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration
• ASTM D891 – Standard Test Methods for Specific Gravity, Apparent, of Liquid Industrial Chemicals
• ASTM D850 – Standard Test Method for Distillation of Industrial Aromatic Hydrocarbons and Related Materials
• ASTM D8366 – Standard Specification for Extruded and Compression Molded Shapes Made from Unfilled Poly(Vinylidene Fluoride) PVDF
• ASTM D8349 – Standard Classification System for and Basis of Specifications for Thermoplastic Joining Interface Materials for Creation of Joints Between Different Materials for the Production of End Items or Parts that are Intended to be Disassembled and/or Reassemb
• ASTM D8311 – Standard Test Method for Impurities in Monoethylene Glycol by Gas Chromatography with Normalization
• ASTM D8156 – Standard Classification System for and Basis of Specifications for Thermoplastic Elastomer Copolyester Molding and Extrusion Materials (TPC)
• ASTM D8116 – Standard Specification for Fully-Formulated Non-Aqueous Engine Coolant for Heavy-Duty Engines (Withdrawn 2019)
• ASTM D8085 – Standard Specification for Non-Aqueous Engine Coolant for Automobile and Light-Duty Service
• ASTM D8033 – Standard Classification System for Poly(Ether Ether Ketone) (PEEK) Molding and Extrusion Materials
• ASTM D8034/D8034M – Standard Test Method for Simulated Service Corrosion Testing of Non-Aqueous Engine Coolants
• ASTM D8039 – Standard Specification for Heat Transfer Fluids (HTF) for Heating and Air Conditioning (HVAC) Systems
• ASTM D8040 – Standard Test Method for Corrosion Test for Heat Transfer Fluids in Glassware
• ASTM D7933 – Standard Test Method for Engine Coolant Stagnation in Flux-Brazed Aluminum Heat Exchangers
• ASTM D7934/D7934M – Standard Test Method for Corrosion of Cast Aluminum Alloys in Non-Aqueous Engine Coolants Under Heat-Rejecting Conditions
• ASTM D7935 – Standard Test Method for Corrosion Test for Non-Aqueous Engine Coolants in Glassware
• ASTM D789 – Standard Test Method for Determination of Relative Viscosity of Concentrated Polyamide (PA) Solutions
• ASTM D7896 – Standard Test Method for Thermal Conductivity, Thermal Diffusivity, and Volumetric Heat Capacity of Engine Coolants and Related Fluids by Transient Hot Wire Liquid Thermal Conductivity Method
• ASTM D787 – Standard Specification for Ethyl Cellulose Molding and Extrusion Compounds
• ASTM D788 – Standard Classification System for Poly(Methyl Methacrylate) (PMMA) Molding and Extrusion Compounds
• ASTM D7840 – Standard Test Method for Foaming Tendencies of Non-Aqueous Engine Coolants in Glassware
• ASTM D7820 – Standard Test Method for Engine Coolant Corrosion Protection Under Accelerated Thermal and Oxidizing Conditions Using a Rotating Pressure Vessel
• ASTM D7821 – Standard Test Method for Field Test Determination of Urea Concentration in Diesel Exhaust Fluid (DEF)
• ASTM D7736 – Standard Test Method for Determination of Acids and Glycol Esters in Glycols
• ASTM D7716 – Standard Test Method for Determination of Residual Methanol in Glycerin by Gas Chromatography
• ASTM D7713 – Standard Specification for Aqueous Engine Coolant Grade Glycol (53 % by Volume Nominal)
• ASTM D7714 – Standard Specification for Glycerin Base Engine Coolant for Automobile and Light-Duty Service

12Next