List of Carbon Steel Standards

• PHSP – DC SUGGESTED FILLER MATERIALS AND MINIMUM PREHEAT TEMPERATURES FOR WELDING STEEL PIPE WITH WALL THICKNESS LESS THAN 3/4
• AWS B2.1-1-202 – STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR SHIELDED METAL ARC WELDING OF CARBON STEEL, (M-1/P-1/S-1, GROUP 1 OR 2), 1/8THROUGH3/4 INCH THICK, E6010 (VERTICAL DOWNHILL) FOLLOWED BY E7018 (VERTICAL UPHILL), AS-WELDED CONDITION
• AWS B2.1-1-203 – STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR SHIELDED METAL ARC WELDING OF CARBON STEEL, (M-1/P-1/S-1, GROUP 1 OR 2), 1/8 THROUGH 3/4 INCH THICK, E6010 (VERTICAL UPHILL), AS-WELDED CONDITION
• AWS B2.1-1-204 – STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR SHIELDED METAL ARC WELDING OF CARBON STEEL, (M-1/P-1/S-1, GROUP 1 OR 2), 1/8 THROUGH 3/4 INCH THICK, E6010 (VERTICAL DOWNHILL ROOT WITH THE BALANCE VERTICAL UPHILL), AS-WELDED CONDITION
• AWS B2.1-1-205 – STANDARD WELDING PROCEDURE SPECIFICATION FOR SMAW OF CARBON STEEL, (M-1/P-1/S-1, GROUP 1 OR 2), 1/8 THROUGH 1-1/2 INCH THICK, E6010 (VERTICAL UPHILL) FOLLOWED BY E7018 (VERTICAL UPHILL), AS-WELDED OR PWHT CONDITION
• AWS B2.1-1-206 – STANDARD WELDING PROCEDURE SPECIFICATION FOR SHIELDED METAL ARC WELDING OF CARBON STEEL, (M-1/P-1/S-1, GROUP 1 OR 2), 1/8 THROUGH 1-1/2 INCH THICK, E6010 FOLLOWED BY E7018 AS-WELDED OR PWHT CONDITION, PRIMARILY PIPE APPLICATIONS
• AWS B2.1-1-207 – STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR GAS TUNGSTEN ARC WELDING OF CARBON STEEL, (M-1/P-1/S-1, GROUP 1 OR 2), 1/8 THROUGH 1-1/2 INCH THICK, ER70S-2, AS-WELDED OR PWHT CONDITION
• AWS B2.1-1-208 – STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR SHIELDED METAL ARC WELDING OF CARBON STEEL, (M-1/P-1/S-1, GROUP 1 OR 2), 1/8 THROUGH 1-1/2 INCH THICK, E7018, AS-WELDED OR PWHT CONDITION (PRIMARILY PIPE APPLICATIONS) HISTORICAL
• AWS B2.1-1-209 – STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR GAS TUNGSTEN ARC WELDING FOLLOWED BY SHIELDED METAL ARC WELDING OF CARBON STEEL, (M-1/P-1/S-1, GROUP 1 OR 2), 1/8 THROUGH 1-1/2 INCH THICK, ER70S-2AND E7018, AS-WELDED OR PWHT CONDITION
• AWS B2.1-1-210 – STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR GAS TUNGSTEN ARC WELDING WITH CONSUMABLE INSERTS OF CARBON STEEL, (M-1/P-1/S-1, GROUP 1 OR 2), 1/8 THROUGH 1-1/2 INCH THICK, INMS-1 AND ER70S-2, AS-WELDED OR PWHT CONDITION
• AWS B2.1-1-211 – STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR GAS TUNGSTEN ARC WELDING WITH CONSUMABLE INSERT ROOT FOLLOWED BY SHIELDED METALARC WELDING OF CARBON STEEL, (M-1/P-1/S-1, GROUP 1 OR 2), 1/8 THROUG1-1/2 INCH THICK, INMS-1, ER70S-2
• AWS B2.1-1-232 – STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR ARGON PLUS 25% CARBON DIOXIDE SHIELDED GAS METAL ARC WELDING (SHORT CIRCUITING TRANSFER MODE) FOLLOWED BY ARGON PLUS 25% CARBON DIOXIDE SHIELDED FLUX CORED ARC WELDING OF CARBON STEEL
• AWS B2.1-1-233 – STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR 75% ARGON PLUS 25% CARBON DIOXIDE SHIELDED GAS METAL ARC WELDING (SHORT CIRCUITING TRANSFER MODE) FOLLOWED BY 98% ARGON PLUS 2% OXYGEN
• AWS B2.1-1-234 – STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR ARGON PLUS 25% CARBON DIOXIDE SHIELDED FLUX CORED ARC WELDING OF CARBON STEEL, (M-1/P-1/S-1, GROUPS 1 and 2), 1/8 THROUGH 1-1/2 INCH THICK, E7XT-X, AS-WELDED OR PWHT CONDITION (HISTORICAL)
• AWS B2.1-1-235 – STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR ARGON PLUS 2% OXYGEN SHIELDED GAS METAL ARC WELDING (SPRAY TRANSFER MODE) OF CARBON STEEL (M-1/P-1/S-1, GROUPS 1 AND 2), 1/8 THROUGH 1-1/2 INCH THICK, ER70S-3, FLAT POSITION ONLY (HISTORICAL)
• AWS B2.1-1-002 – STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR GAS TUNGSTEN ARC WELDING OF CARBON STEEL (M-1/P-1, GROUP 1 OR 2), 3/16 INCH [5 MM] THROUGH 7/8 INCH [22 MM] THICK, ER70S-2 AND ER70S-3, IN THE AS-WELDED CONDITION, PRIMARILY PLATE AND STRUCTURAL APPLICATIONS
• AWS B2.1-1-201 – STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR SHIELDED METAL ARC WELDING OF CARBON STEEL, (M-1/P-1/S-1, GROUP 1 OR 2), 1/8 THROUGH 3/4 INCH THICK, E6010 (VERTICAL UPHILL) FOLLOWED BY E7018 (VERTICAL UPHILL), AS-WELDED CONDITION (HISTORICAL)
• AWS B2.1-1-003 – STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR GAS METAL ARC WELDING (SHORT CIRCUITING TRANSFER MODE) OF GALVANIZED STEEL (M-1), 18 THROUGH 10 GAUGE, IN THE AS-WELDED CONDITION, WITH OR WITHOUT BACKING
• AWS B2.1-1-004 – STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR GAS METAL ARCWELDING (SHORT CIRCUITING TRANSFER MODE) OF CARBON STEEL, (M-1, GROUP 1), 18 THROUGH 10 GAUGE, IN THE AS-WELDED CONDITION, WITH OR WITHOUT BACKING
• AWS B2.1-1-007 – STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR GAS TUNGSTEN ARC WELDING OF GALVANIZED STEEL, (M-1), 18 THROUGH 10 GAUGE, IN THE AS-WELDED CONDITION, WITH OR WITHOUT BACKING
• AWS B2.1-1-008 – STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR GAS TUNGSTEN ARC WELDING OF CARBON STEEL, (M-1, P-1, OR S-1), 18 THROUGH 10 GAUGE, IN THE AS-WELDED CONDITION, WITH OR WITHOUT BACKING
• AWS B2.1-1-011 – STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR SHIELDED METAL ARC WELDING OF GALVANIZED STEEL, (M-1), 10 THROUGH 18 GAUGE, IN THE AS-WELDED CONDITION, WITH OR WITHOUT BACKING
• AWS B2.1-1-012 – STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR SHIELDED METAL ARC WELDING OF CARBON STEEL, (M-1, P-1, OR S-1 TO M-1, P-1, OR S-1), 10 THROUGH 18 GAUGE, IN THE AS-WELDED CONDITION, WITH OR WITHOUT BACKING
• AWS B2.1-1-016 – STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR SHIELDED METAL ARC WELDING OF CARBON STEEL, (M-1/P-1/S-1, GROUP 1 or 2), 1/8 THROUGH 1-1/2 INCH THICK, E7018, in the As-Welded or PWHT Condition, Primarily Plate and Structural Applications
• AWS B2.1-1-017 – STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR SHIELDED METAL ARC WELDING OF CARBON STEEL, (M-1/P-1/S-1, GROUP 1 OR 2), 1/8 THROUGH 1-1/2 INCH THICK, E6010, IN THE AS-WELDED OR PWHT CONDITION, PRIMARILY PLATE AND STRUCTURAL APPLICATIONS.
• AWS B2.1-1-018 – STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR SELF-SHIELDED FLUX CORED ARC WELDING OF CARBON STEEL, (M-1/P-1/S-1, GROUP 1 OR 2),1/8 THROUGH 1-1/2 INCH THICK, E71T-8, AS-WELDED CONDITION (HISTORICAL)
• AWS B2.1-1-019 – STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR CO2 SHIELDED FLUX CORED ARC WELDING OF CARBON STEEL, (M-1/P-1/S-1, GROUP 1 OR 2), 1/8 THROUGH 1-1/2 INCH THICK, E70T-1 AND E71T-1, AS-WELDED CONDITION
• AWS B2.1-1-020 – STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR 75% AR/25% CO2 SHIELDED FLUX CORED ARC WELDING OF CARBON STEEL, (M-1/P-1/S-1, GROUP1 OR 2), 1/8 THROUGH 1-1/2 INCH THICK, E70T-1 AND E71T-1, AS-WELDED OR PWHT CONDITION
• AWS B2.1-1-021 – STANDARD WELDING PROC. SPEC. (SWPS) FOR GAS TUNGSTEN ARC WELDING FOLLOWED BY SHIELDED METAL ARC WELDING OF CARBON STEEL (M-1/P-1, GROUP 1 OR 2) 1/8 ” [3 MM] THROUGH 1-1/2 ” [38 MM] THICK, ER70S-2 AND E7018, IN THE AS-WELDED OR PWHT CONDITION
• AWS B2.1-1/8-324 – STANDARD WELDING PROCEDURE SPECIFICATION FOR NAVAL APPLICATIONS (SWPS-N) FOR SHIELDED METAL ARC WELDING OF CARBON STEEL (S-1) TO AUSTENITIC STAINLESS STEEL (S-8), 1/8 INCH [3 MM] THROUGH 1-1/2 INCH [38 MM] THICK, MIL-309-XX AND MIL-309L-XX
• AWS B2.1-1-022 – STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR SHIELDED METAL ARC WELDING OF CARBON STEEL, (M-1/P-1/S-1, GROUP 1 OR 2), 1/8 THROUGH 1-1/2 INCH THICK, E6010 (VERTICAL UPHILL) FOLLOWED BY E7018, AS-WELDED OR PWHT CONDITION
• AWS B2.1-1/8-325 – STANDARD WELDING PROCEDURE SPECIFICATION FOR NAVAL APPLICATIONS (SWPS-N) FOR GAS TUNGSTEN ARC WELDING FOLLOWED BY SHIELDED METAL ARC WELDING OF CARBON STEEL (S-1) TO AUSTENITIC STAINLESS STEEL (S-8), 1/8 INCH [3 MM] THROUGH 1-1/2 INCH [38 MM] THICK, MIL-309
• AWS B2.1-1-026 – STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR SHIELDED METAL ARC WELDING OF CARBON STEEL, (M-1/P-1/S-1, GROUP 1 OR 2), 1/8 THROUGH 1-1/2 INCH THICK, E6010(VERTICAL DOWNHILL) FOLLOWED BY E7018, AS-WELDED OR PWHT CONDITION (HISTORICAL)
• AWS B2.1-1-001 – Standard Welding Procedure Specification (SWPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1, Group 1 or 2), 3/16 inch [5 mm] through 3/4 inch [19 mm] Thick, E7016 and E7018, in the As-Welded Condition, Primarily Plate and Structural Applications
• AWS B2.1-1-027 – STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR SELF-SHIELDED FLUX CORED ARC WELDING OF CARBON STEEL, (M-1/P-1/S-1, GROUP 1 OR 2), 1/8 THROUGH 1/2 INCH THICK, E71T-11, AS-WELDED CONDITION (HISTORICAL)
• AWS B2.1-1/8-006 – STANDARD WELDING PROCEDURE SPECIFICATION FOR GMAW (SHORT CIRCUITING TRANSFER MODE) OF CARBON STEEL TO AUSTENITIC STAINLESS STEEL, (M-1 TO M-8, P-8, OR S-8), 18 THROUGH 10 GAUGE, IN THE AS-WELDED CONDITION WITH OR WITHOUT BACKING
• AWS B2.1-1/8-014 – STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR SHEILDED METAL ARC WELDING OF CARBON STEEL TO AUSTENITIC STAINLESS STEEL, (M-1 TO M-8/P-8/S-8, GROUP 1), 10 THROUGH 18 GAUGE, IN THE AS-WELDED CONDITION, WITH OR WITHOUT BACKING
• AWS B2.1-1/8-227 – STANDARD WELDING PROCEDURE SPECIFICATION FOR GTAW OF CARBON STEEL, (M-1/P-1/S-1, GROUPS 1 OR 2) TO AUSTENITIC STAINLESS STEEL (M-8/P-8/S-8, GROUP 1), 1/16 THROUGH 1-1/2 INCH THICK, ER309(L), AS-WELDED CONDITION
• AWS B2.1-1/8-228 – STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR SHIELDED METAL ARC WELDING OF CARBON STEEL, (M-1/P-1/S-1, GROUPS 1 or 2) TO AUSTENITIC STAINLESS STEEL (M-8/ P-8/S-8, GROUP 1), 1/8 THROUGH 1-1/2 INCH THICK, E309(L)-15, -16, or -17
• AWS B2.1-1/8-229 – STANDARD WELDING PROCEDURE SPECIFICATION FOR GTAW FOLLOWED BY SHIELDED METAL ARC WELDING OF CARBON STEEL, (M-1/P-1/S-1, GROUPS 1 OR 2) TO AUSTENITIC STAINLESS STEEL (M-8/P-8/S-8, GROUP 1), 1/8 THROUGH 1-1/2 INCH
• AWS B2.1-1/8-230 – STANDARD WELDING PROCEDURE SPECIFICATION FOR GTAW WITH CONSUMABLE INSERT ROOT OF CARBON STEEL, (M-1/P-1/S-1, GROUPS 1 OR 2) TO AUSTENITIC STAINLESS STEEL (M-8/P-8/S-8, GROUP 1), 1/16 THROUGH 1-1/2 INCH THICK
• AWS B2.1-1/8-323 – STANDARD WELDING PROCEDURE SPECIFICATION FOR NAVAL APPLICATIONS (SWPS-N) FOR GAS TUNGSTEN ARC WELDING OF CARBON STEEL (S-1) TO AUSTENITIC STAINLESS STEEL (S-8), 1/8 INCH [3 MM] THROUGH 1-1/2 INCH [38 MM] THICK, MIL-309 ER309L, IN THE AS-WELDED CONDITION
• AWS A5.5/A5.5M – SPECIFICATION FOR LOW – ALLOY STEEL ELECTRODES FOR SHIELDED METAL ARC WELDING
• API 1104 – WELDING OF PIPELINES AND RELATED FACILITIES – 20TH EDITION
• AWS A5.23/A5.23M – SPECIFICATION FOR LOW-ALLOY STEEL ELECTRODES AND FLUXES FOR SUBMERGED ARC WELDING (HISTORICAL)
• AWS A5.26/A5.26M – SPECIFICATION FOR CARBON AND LOW-ALLOY STEEL ELECTRODES FOR ELECTROGAS WELDING
• AWS A5.28/A5.28M – SPECIFICATION FOR LOW-ALLOY STEEL ELECTRODES AND RODS FOR GAS SHIELDED ARC WELDING (HISTORICAL)
• AWS A5.29/A5.29M – SPECIFICATION FOR LOW-ALLOY STEEL ELECTRODES FOR FLUX CORED ARC WELDING (HISTORICAL)
• AWS A5.17/A5.17M – SPECIFICATION FOR CARBON STEEL ELECTRODES AND FLUXES FOR SUBMERGED ARC WELDING (HISTORICAL)
• AWS A5.18/A5.18M – SPECIFICATION FOR CARBON STEEL ELECTRODES AND RODS FOR GAS SHIELDED ARC WELDING (HISTORICAL)
• AWS A5.2/A5.2M – SPECIFICATION FOR CARBON AND LOW-ALLOY STEEL RODS FOR OXYFUEL GAS WELDING
• AWS A5.20/A5.20M – CARBON STEEL ELECTRODES FOR FLUX CORED ARC WELDING (HISTORICAL)
• AWS A5.1/A5.1M – SPECIFICATION FOR CARBON STEEL ELECTRODES