List of US DoD Standards

• TIA455.177 – Measurement Methods and Test Procedures- Numerical Aperture
• TIA455.179 – Fiber, Cleaved, End Faces by Interferometry, Inspection of
• TIA455.171 – Fiber Optical Cable Assemblies, Attenuation by Substitution Measurement – for Short-Length Multimode Graded-Index and Single-Mode
• TIA455.175 – Measurement Methods and Test Procedures- Chromatic Dispersion
• TIA455.168 – Fibers Optical, Chromatic Dispersion Measurement of Multimode Graded-Index and Single-Mode, by Spectral Group Delay Measurement in the Time Domain (S/S by TIA-455-175)
• TIA455.100 – Gas Leakage Test for Gas – Blocked Fiber Optic Cables
• TIA455.107 – Determination of Component Reflectance or Link/System return Loss Using a Loss Test Set
• TIA455.167 – Mode Field Diameter Measurement – Variable Aperture Method in the Farfield
• TIA455.87 – Fiber Optic Cable Knot Test
• TIA455.88 – Fiber Optic Cable Bend Test
• TIA455.91 – Fiber Optic Cable Twist-Bend Test
• TIA455.81 – Optic Cable, Compound Flow (Drip) Test for Filled Fiber
• TIA455.82 – Fluid Penetration Test for Fluid-Blocked Fiber Optic Cable
• TIA455.84 – Fiber Optic Cable, Jacket Self-Adhesion (Blocking Test) for
• TIA455.60 – FOTP-60 Measurement of Fiber of Cable Length Using and OTDR (S/S by TIA-455-133-A)
• TIA455.62 – Optical Fiber Macrobend Attenuation, Measurement of
• TIA455.80 – Measurement Methods and Test Procedures-Cut-Off Wavelength
• TIA455.43 – Output Near-Field Radiation Pattern Measurement of Optical Waveguide Fibers (S/S by TIA-455-176)
• TIA455.50 – Fiber, Optical, Spectral Attenuation Measurements, Light Launch Conditions for Long-Length Graded-Index (S/S by TIA-455-78)
• TIA455.57 – Preparation and Examination of Optical Fiber Endface for Testing Purposes
• TIA455.37 – Fiber, Optic Cable, Low or High Temperature Bend Test for
• TIA455.41 – Fiber Optic Cables, Compressive Loading Resistance of
• TIA455.42 – Optical Crosstalk in Fiber Optic Components
• TIA455.33 – Fiber Optic Cable Tensile Loading and Bending Test
• TIA455.34 – Interconnection Device Insertion Loss Test
• TIA455.35 – Fiber Optic Component Dust (Fine Sand) Test
• TIA455.23 – Fiber Optic Component Seals, Air Leakage of
• TIA455.26 – Fiber Optic Cable Interconnecting Devices, Crush Resistance of
• TIA455.29 – Refractive Index Profile, Transverse Interference Method
• TIA455.20 – Measurement Methods and Test Procedures-Monitoring of Changes in Optical Transmittance (IEC-60793-1-46 Optical Fibers Part 1-46)
• TIA455.21 – Fiber Optic, Interconnecting Devices, Mating Durability of
• TIA455.22 – Fiber Optic Components, Ambient Light Susceptibility of
• TIA455.5 – Fiber Optic Components, Humidity Test Procedure for
• TIA455.6 – Cable Retention Test Procedure for Fiber Optic Cable Interconnecting Devices
• TIA455.18 – Optic Components and Assemblies, Fiber, Acceleration Testing of (No S/S Document)
• TIA455.4 – Fiber Optic Connector/Component Temperature Life
• TIA455.2 – Optic Devices, Fiber, Impact Test Measurements for
• TIA455.3 – Optical Fibers, Optical Cable, and Other Passive Fiber Optic Components, Procedure to Measure Temperature Cycling Effects on
• SAE-AS5603 – Digital Fiber Optic Link Loss Budget Methodology for Aerospace Platforms
• SAE-AS5750 – Loss Budget Specification for Fiber Optic Links
• TIA455 – Fiber Optic Fibers, Cables, Transducers, Sensors, Connecting and Terminating Devices, and other Fiber Optic Components
• EIA-TIA526.14 – Fiber, Optical Power Loss Measurements of Installed Multimode Cable Plant (See Notice of Withdrawal for Replacement Information)
• IEEE812 – FIBER OPTICS, IEEE STANDARD DEFINITIONS OF TERMS RELATING TO (NO S/S DOCUMENT)
• SAE-AIR6113 – Guidelines for Design of Digital Fiber Optic Link Loss Budget Methodolgy
• EIA-TIA455.184 – Fiber Optic Interconnecting Devices, Coupling Proof Overload Test for(See Notice of Withdrawal for Replacement Information)
• EIA-TIA455.188 – Low Temperature Testing of Fiber Optic Components (See Notice of Withdrawal for Replacement Information)
• EIA-TIA526.4 – Optical Eye Pattern Measurement Procedure (See Notice of Withdrawal for Replacement Information)
• EIA-TIA455.173 – Fiber, Optical, Side-View Method, Coating Geometry, Measurement for (See Notice of Withdrawal for Replacement Information)
• EIA-TIA455.176 – Fiber Optical Cross-Sectional Geometry by Grey-Scale Analysis, Method for Measuring (See Notice of Withdrawal for Replacement Information)
• EIA-TIA455.178 – Fibers, Optical, Mechanically Removing Coatings from, Measurements of Strip Force, Required for (See Notice of Withdrawal for Replacement Information)
• EIA-TIA455.104 – Fiber Optic Cable Cyclic Flexing Test (See Notice of Withdrawal for Replacement Information)
• EIA-TIA455.127 – Spectral Characterization of Multimode Laser Diodes See Notice of Withdrawal for Replacement Information)
• EIA-TIA455.78 – Fibers, Optical, Single-Mode, Spectral-Attenuation Cutback, Measurement for (See Notice of Withdrawal for Replacement Information)
• EIA-TIA455.67 – Optical Characteristics of Optical Fibers, Procedure for Assessing High Temperature Exposure Effects on (See Notice of Withdrawal for Replacement Information)
• EIA-TIA455.75 – Fluid Immersion Aging Procedure for Optical Fibers Mechanical Properties (See Notice of Withdrawal for Replacement Information)
• EIA-TIA455.77 – Procedures to Qualify a Higher-Order Mode Filter for Measurements on Single-Mode Fiber (No S/S Document)
• EIA-TIA455.58 – Fibers, Optical, Grand-Index, Core Diameter, Measurement of (See Notice of Withdrawal for Replacement Information)
• EIA-TIA455.60 – Fiber or Cable Length Using an OTDR, Measurement of (See Notice of Withdrawal for Replacement Information)
• EIA-TIA455.63 – Fibers, Optical, Torsion Test for (No S/S Document)
• EIA-TIA455.54 – Fibers, Overfilled Launching Conditions to Multimode, Mode Scrambler, Requirements for (See Notice of Withdrawal for Replacement Information)
• EIA-TIA455.55 – Fibers, Optical, Measuring Coating and Buffer Geometry of, End-View, Methods for (No S/S Document)
• EIA-TIA455.56 – Test Method for Evaluating Fungus Resistance of Optical Fiber and Cable (See Notice of Withdrawal for Replacement Information)
• EIA-TIA455.46 – Fibers, Optical, Special Attenuation Measurement for Long-Length, Graded-Index (No S/S Document)
• EIA-TIA455.47 – Radiation Pattern Measurement, Output Far Field (See Notice of Withdrawal for Replacement Information)
• EIA-TIA455.48 – Fiber, Optical, Fiber Cladding Diameter Using Laser-Based Instruments, Measurement of (See Notice of Withdrawal for Replacement Information)
• EIA-TIA455.31 – Fiber, Tensile Proof Test Method (See Notice of Withdrawal for Replacement Information)
• EIA-TIA455.32 – Fiber Optic Circuit Discontinuities (See Noticed of Withdrawal for Replacement Information)
• EIA-TIA455.39 – Fiber Optic Cable Water Wicking Test (See Notice of Withdrawal for Replacement Information)
• EIA-TIA455.25 – Fiber Optic Cables and Cable Assemblies, Repeated Impact Testing of (See Notice of Withdrawal for Replacement Information)
• EIA-TIA455.28 – Fiber, Optical, Measuring Dynamic Tensile Strength of, Method for (See Notice of Withdrawal for Replacement Information)
• EIA-TIA455.30 – Frequency Domain Measurement of Multimode Optical Fiber Information Transmission Capacity (See Notice of Withdrawal for Replacement Information)
• EIA-TIA455.2 – Fiber Optic Fibers, Cables, Transducers, Connecting and Terminating Devices (See Notice of Withdrawal for Replacement Information)
• EIA-TIA455.16 – Fiber Optic Components, Salt Spray (Corrosion), Test for (See Notice of Withdrawal for Replacement Information)
• EIA-TIA455.24 – Fibers, Single-Mode, Water Peak Attenuation, Measurement of (No S/S Document)
• EIA-RS455.99 – OPTIC CABLE, GAS FLAME TEST FOR SPECIAL PURPOSE FIBER (NO S/S DOCUMENT)
• EIA-RS455.101 – ACCELERATED OXYGEN AGING (NO S/S DOCUMENT)
• EIA-TIA455 – Fiber Optic Fibers, Cables, Transducers, Sensors, Connecting and Terminating Devices, and Other Fiber Optic Components, Standard Test Procedure for (See Notice of Withdrawal for Replacement Information)
• EIA-RS455.85 – CABLE TWIST TEST, FIBER OPTIC (NO S/S DOCUMENT)
• EIA-RS455.86 – Fiber Optic Cable Jacket Shrinkage (S/S by TIA-455-86)
• EIA-RS455.89 – OPTIC CABLE, FIBER, JACKET ELONGATION AND TENSILE STRENGTH (S/S BY FED-STD-228)
• EIA-RS455.40 – CABLE, FLUID IMMERSION TEST FOR FIBER OPTIC (NO S/S DOCUMENT)
• EIA-RS455.44 – Profile, Refractive Index, Refracted Ray Method (S/S by TIA-455-176)
• EIA-RS455.66 – Optical Waveguide Coatings & Buffers, Test Methods for Measuring Relative Abrasion Resistance of (No S/S Document)
• EIA-RS455.20 – Optical Transmittance, Changes in, Measurement of (See Notice of Withdrawal for Replacement Information)
• EIA-RS455.14 – Fiber Optic Shock Test, (Specified Pulse) (S/S by TIA-455-14)
• EIA-RS455.15 – Immersion, Altitude (S/S by TIA-455-15)
• EIA-RS455.2 – FIBERS, FIBER OPTICS, CABLES, TRANSDUCERS, CONNECTING AND TERMINATING DEVICES (S/S BY EIA455.23 AND EIA455.26)
• EIA-RS455.3 – Optical Cable and Other Passive Fiber Optic Components, Procedure to Measure Temperature Cycling Effects of Optical Fiber (S/S by TIA-455-3)
• EIA-RS455.13 – Optic Devices, Visual and Mechanical Inspection of Fibers, Cables, Connectors and/or other Fiber (S/S by TIA-455-13)
• EIA-RS50 – Fiber, Optical, Long Length Graded Index, Spectral Attenuation Measurements, Light-Launch Conditions for (S/S by TIA-455-78)
• EIA-RS455 – OPTICAL WAVEGUIDE COATINGS AND BUFFERS, TEST METHODS FOR MEASURING RELATIVE ABRASION RESISTANCE OF (NO S/S DOCUMENT)
• EIA-RS455.1 – FIBERS, FIBER OPTICS, CABLES, TRANSDUCERS, CONNECTING AND TERMINATING DEVICES (S/S BY EIA 455-2, MIL-STD-1678, EIA 455-18)
• EIA526.10 – Systems, Dispersion Power Penalty in Digital Single-Mode, Measurement of (See Notice of Withdrawal for Replacement Information)
• EIA587 – Fiber Optic Graphic Symbols (S/S by TIA-587)
• EIA-RS46 – Fibers, Optical, Spectral Attenuation Measurement for Long Length, Graded-Index (No S/S Document)
• EIA455.175 – Single-Mode Optical Fibers by the Differential Phase Shift Method, Chromatic Dispersion Measurement of (S/S by TIA455.175)
• EIA455.177 – Optical Fibers, Graded Index, Numerical Aperture Measurement of (S/S by TIA455.177)
• EIA455.179 – Fiber, Cleaved, End Faces by Interferometry, Inspection of (S/S by TIA455.179)
• EIA455.171 – Fiber Optical Cable Assemblies, Attenuation by Substitution Measurement – for Short-Length Multimode Graded-Index and Single-Mode (S/S by TIA455.171)
• EIA455.174 – Fiber Optical, Mode Field Diameter of Single-Mode, by Knife-Edge Scanning in the Far Field (No S/S Document)

12Next