List of 5610 - Mineral Construction Materials, Bulk Standards

• SSPC-SP11 – TOOL, POWER, CLEANING TO BARE METAL SURFACE
• ASTM-D5727/D5727M – Standard Specification for Emulsified Refined Coal Tar (Mineral Colloid Type)
• ASTM-E329 – Agencies Engaged in Construction Inspection, Testing, or Special Inspection
• ASTM-E1042 – Material, Acoustically Absorptive, Applied by Trowel or Spray, Standard Classification for
• AWWA-C104 – CEMENT, MORTAR LINING FOR DUCTILE IRON PIPE AND FITTINGS FOR WATER
• AWWA-C205 – CEMENT MORTAR PROTECTIVE LINING & COATING FOR STEEL WATER PIPE – 4 INCH & LARGER – SHOP APPLIED
• ASTM-D4429 – Soils in Place, CBR (California Bearing Ratio) of
• ASTM-D4479 – ASPHALT ROOF COATINGS – ASBESTOS-FREE
• ASTM-D4586 – ASPHALT ROOF CEMENT, ASBESTOS-FREE
• ASTM-D4643 – Water (Moisture) Content of Soil by the Microwave Oven Method, Determination of
• ASTM-D4791 – Particles Flat, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate.
• ASTM-D4254 – Soils and Calculation of Relative Density, Minimum Index Density and Unit Weight of
• ASTM-D4263 – Concrete by the Plastic Sheet Method, Indicating Moisture in
• ASTM-D4318 – Soils, Liquid Limit, Plastic Limit, and Plasticity Index of
• ASTM-D4402 – ASPHALTS AT ELEVATED TEMPERATURES USING A ROTATIONAL VISCOMETER, VISCOSITY DETERMINATION OF
• ASTM-D4427 – PEAT SAMPLES BY LABORATORY TESTING
• ASTM-D3910 – SEAL, SLURRY, DESIGN, TESTING, AND CONSTRUCTION OF
• ASTM-D4022 – Cement, Coal Tar Roof, Asbestos Containing (No S/S Document)
• ASTM-D4083 – Soil, Frozen, (Visual-Manual Procedure), Description of
• ASTM-D4220/D4220M – Standard Practices for Preserving and Transporting Soil Samples
• ASTM-D4253 – SOILS USING A VIBRATORY TABLE, MAXIMUM INDEX DENSITY AND UNIT WEIGHT OF
• ASTM-D3740 – Soil and Rock as Used in Engineering Design and Construction, Minimum Requirements for Agencies Engaged in the Testing and/or Inspection of
• ASTM-D3550 – Wall, Thick Ring-Lined, Split Barrel, Drive Sampling of Soils (No S/S Document)
• ASTM-D3551 – Laboratory Preparation of Soil-Lime Mixtures Using a Mechanical Mixer
• ASTM-D3666 – Materials, Paving, Agencies Testing and Inspecting Road, Minimum Requirements for
• ASTM-D3668 – SOIL-LIME MIXTURES, LABORATORY COMPACTED, BEARING RATIO OF (NO S/S DOCUMENT)
• ASTM-D3282 – Soils and Soil-Aggregate Mixtures for Highway Construction Purposes, Classification of
• ASTM-D3320 – COAL-TAR PITCH, EMULSIFIED, (MINERAL COLLOID TYPE) (S/S BY ASTM-D5727)
• ASTM-D3381 – Viscosity-Graded Asphalt Cement for use in Pavement Construction
• ASTM-D3385 – Soils, Infiltration Rate of, in Field Using Double-Ring Infiltrometers, Stand Test Methods for
• ASTM-D3441 – Soil, Mechanical Cone Penetration Tests of (No S/S Document)
• ASTM-D2939 – Bitumens, Emulsified, Used as Protective Coatings (No S/S Document)
• ASTM-D2940 – HIGHWAYS OR AIRPORTS, GRADED AGGREGATE MATERIAL FOR BASES OR SUBBASES FOR
• ASTM-D2950 – Methods, Nuclear, Density of Bituminous Concrete in Place by (See Notice for Replacement Information)
• ASTM-D2995 – BITUMINOUS DISTRIBUTORS, DETERMINING APPLICATION RATE OF, STANDARD PRACTICE FOR
• ASTM-D3017 – Water Content of Soil and Rock in Place by Nuclear Methods (Shallow Depth) (No S/S Document)
• ASTM-D2922 – Soil and Soil-Aggregate in Place by Nuclear Methods (Shallow Depth), Density of (No S/S Document)
• ASTM-D2937 – Soil in Place by the Drive-Cylinder Method, Density of
• ASTM-D2822 – Asphalt Roof Cement
• ASTM-D2823 – Asphalt Roof Coatings
• ASTM-D2828 – AIRFIELD PAVEMENTS, PORTLAND CEMENT CONCRETE, SAWABLE TYPE, NONBITUMINOUS INSERTS FOR CONTRACTION JOINTS IN – 8 JAN 71
• ASTM-D2419 – Sand Equivalent Value of Soils and Fine Aggregate
• ASTM-D2487 – Soils for Engineering Purposes, Classification of (Unified Soil Classification System)
• ASTM-D2488 – SOILS (VISUAL-MANUAL PROCEDURE), DESCRIPTION AND IDENTIFICATION OF
• ASTM-D2573/D2573M – Standard Test Method for Field Vane Shear Test in Saturated Fine-Grained Soils
• ASTM-D2726 – Mixtures, Compacted Bituminous, Bulk Specific Gravity and Density of Non-Absorptive
• ASTM-D2171 – Viscosity of Asphalts by Vacuum Viscometer
• ASTM-D2172 – Quantitative Extraction of Bitumen from Bituminous Paving Mixtures (See Notice of Withdrawal for Replacement Information)
• ASTM-D2216 – Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass
• ASTM-D2217 – Soil Samples for Particle-Size Analysis and Determination of Soil Constants, Wet Preparation of (No S/S Document)
• ASTM-D2397 – Asphalt, Cationic Emulsified
• ASTM-D2167 – Soil in Place by the Rubber Balloon Method, Density and Unit Weight of
• ASTM-D2168 – Calibration of Laboratory Mechanical-Rammer Soil Compactors
• ASTM-D2170 – Kinematic Viscosity of Asphalts (Bitumens), Standard Test Method for (See Notice of Withdrawal for Replacement Information)
• ASTM-D2049 – SOILS, STANDARD TEST METHOD FOR RELATIVE DENSITY OF COHENSIONLESS – 19 SEP 69 (S/S BY ASTM D4253-83 & D4254-83
• ASTM-D2113 – Rock Core Drilling and Sampling of Rock for Site Investigation
• ASTM-D1883 – Soils, Laboratory-Compacted, CBR (California Bearing Ratio) of
• ASTM-D2026/D2026M – Standard Specification for Cutback Asphalt (Slow-Curing Type)
• ASTM-D2027 – Asphalt, Cutback (Medium-Curing Type) (See Withdrawal Notice for Replacement Information)
• ASTM-D2028 – Asphalt, Cutback (Rapid-Curing Type) (See Withdrawal Notice for Replacement Information)
• ASTM-D2041 – Mixtures, Bituminous Paving, Theoretical Maximum Specific Gravity and Density of (See Notice of Withdrawal for Replacement Information)
• ASTM-D1751 – Paving, Concrete, and Structural Construction (Nonextruding and Resilient Bituminous Types), Preformed Expansion Joint Filler for
• ASTM-D1752 – Sponge, Preformed, Rubber Cork and Recycled PVC Expansion, Preformed, Joint Fillers for Concrete Paving and Structural Construction (No S/S Document)
• ASTM-D1854 – Jet-Fuel-Resistant Concrete Joint Sealer, Hot-Applied Elastic Type (No S/S Document)
• ASTM-D1863 – Standard Specification for Mineral Aggregate Used on Built-Up Roofs Construction
• ASTM-D1864 – MOISTURE IN MINERAL AGGREGATE USED ON BUILT-UP ROOFS
• ASTM-D1587/D1587M – Standard Practice for Thin-Walled Tube Sampling of Fine-Grained Soils for Geotechnical Purposes
• ASTM-D1632 – SOIL-CEMENT COMPRESSION AND FLEXURE TEST SPECIMENS IN THE LABORATORY, MAKING AND CURING, STANDARD PRACTICE FOR (NO S/S DOCUMENT)
• ASTM-D1633 – Soil-Cement Cylinders, Compressive Strength of Molded (No S/S Document)
• ASTM-D1664 – BITUMEN AGGREGATE MIXTURE, COATING & STRIPPING OF (NO S/S DOCUMENT)
• ASTM-D1586 – Penetration Test (SPT) and Split-Barrel Sampling of Soils
• ASTM-D1452/D1452M – Standard Practice for Soil Exploration and Sampling by Auger Borings
• ASTM-D1461 – Standard Test Method for Moisture or Volatile Distillates in Asphalt Mixtures
• ASTM-D1556/D1556M – Standard Test Method for Density and Unit Weight of Soil in Place by Sand-Cone Method
• ASTM-D1557 – Laboratory Compaction Characteristics of Soil using Modified Effort (56,000 FT-LBF/FT3 (2,700 KN-M/M3))
• ASTM-D1559 – RESISTANCE TO PLASTIC FLOW OF BITUMINOUS MIXTURES USING MARSHALL APPARATUS (NO S/S DOCUMENT)
• ASTM-D1140 – SOILS, AMOUNT OF MATERIAL IN, FINER THAN THE NO. 200 (75-UM) SIEVE
• ASTM-D1188 – Bituminous Mixtures, Compacted, Bulk Specific Gravity and Density of Using Coated Samples
• ASTM-D1194 – SOIL, STATIC LOAD AND SPREAD FOOTINGS, BEARING CAPACITY OF (NO S/S DOCUMENT)
• ASTM-D1241 – Soil-Aggregate Subbase, Base and Surface Courses, Materials for
• ASTM-D1369 – Asphalt-Aggregate Surface Treatments, Quantities of Materials for, Standard Practice for
• ASTM-D994 – Concrete, Preformed Expansion Joint Filler for (Bituminous Type)
• ASTM-D995 – MIXTURE, PAVING, STANDARD SPECIFICATION FOR MIXING PLANTS FOR HOT-MIXED, HOT-LAID BITUMINOUS PAVING MIXTURE (NO S/S DOCUMENT)
• ASTM-D1073 – Aggregate, Fine, for Bituminous Paving Mixtures
• ASTM-D1075 – Water on Compressive Strength of Compacted Bituminous Mixtures, Effect of
• ASTM-D1139 – TREATMENTS, SINGLE OR MULTIPLE BITUMINOUS SURFACE, AGGREGATE FOR
• ASTM-D854 – Soils, Solids by Water,Pycnometer, Specific Gravity of
• ASTM-D872 – SULFONATION INDEX OF ROAD TARS (NO S/S DOCUMENT)
• ASTM-D946 – Asphalt Cement for use in Pavement Construction, Penetration-Graded (See Notice of Withdrawal for Superseding Information)
• ASTM-D977 – Asphalt, Emulsified
• ASTM-D979/D979M – Standard Practice for Sampling Bituminous Paving Mixtures
• ASTM-D633 – Road Tar, Standard Volume Correction Table for
• ASTM-D653 – Soil, Rock, and Contained Fluids, Standard Terminology Relating to
• ASTM-D692 – Bituminous Paving Mixtures, Coarse Aggregate, Standard Specification for (See Notice of Withdrawal for Superseding Information)
• ASTM-D693 – Aggregate, Crushed, for Macadam Pavements (No S/S Documents)
• ASTM-D698 – Soil Using Standard Effort (12 400 ft-lbf/ft3 (600 knm/m3)) Test Methods for Laboratory Compaction Characteristics of
• ASTM-D545 – Concrete Construction (Nonextruding and Resilient Types), Preformed Expansion Joint Fillers for
• ASTM-D546 – Paving Mixtures, Sieve Analysis of Mineral Filler for Bituminous, Standard Test Method for
• ASTM-D558 – Soil-Cement Mixtures, Moisture-Density (Unit Weight) Relations of
• ASTM-D559/D559M – Standard Test Method for Wetting and Drying Compacted Soil-Cement Mixtures

12Next