List of 4820 - Valves, Nonpowered Standards

• UL252A – Gas, Compressed, Regulator Accessories (No S/S Document)
• UL262 – Gate Valves for Fire Protection Service (No S/S Document)
• UL312 – Check Valves for Fire-Protection Service
• UL429 – Valves, Electrically Operated
• UL842 – Valve for Flammable Fluids
• MSS-SP110 – Ball Valves Threaded, Socket-Welding, Solder Joint, Grooved and Flared Ends
• NFPA-T3.5.45 – Hydraulic Fluid Power – Two-Port Slip-In Cartridge Values – Cavities (S/S by ISO7368)
• SAE-AS5379 – Valves, Safety, Cabin Air, General Specification for (See Notice of Withdrawal for Replacement Information)
• SAE-AS8712 – Valve; Air Relief, Low Pressure
• AWWA-C509 – VALVE, GATE, RESILIENT-SEATED FOR WATER & SEWERAGE SYSTEMS (NO S/S DOCUMENT)
• AWWA-C510 – VALVE, DOUBLE CHECK, BACKFLOW-PREVENTION ASSEMBLY (NO S/S DOCUMENT)
• AWWA-C511 – ASSEMBLY, PRINCIPLE BACKFLOW-PREVENTION, REDUCED-PRESSURE (NO S/S DOCUMENT)
• ISO7368 – Hydraulic Fluid Power – Two-Port Slip-in Cartridge Valves-Cavities
• MSS-SP6 – Valves and Fittings, Contact Faces of Pipe Flanges and Connecting-End Flanges of
• MSS-SP61 – Valves, Steel, Pressure Testing of
• MSS-SP70 – Gate Valves, Cast Iron, Flanged and Threaded
• MSS-SP71 – Valves, Gray Iron Swing Check, Flanged and Threaded Ends
• MSS-SP72 – Valves, Ball, with Flanged or Butt-Welding Ends for General Service
• MSS-SP80 – Bronze Gate, Globe, Angle and Check Valves
• AWWA-C506 – BACKFLOW PREVENTION DEVICES-REDUCED PRESSURE PRINCIPLE AND DOUBLE CHECK VALVE TYPES, AWWA STANDARD FOR (NO S/S DOCUMENT)
• AWWA-C508 – VALVES, SWING-CHECK, FOR ORDINARY WATERWORKS SERVICE, AWWA STANDARD FOR (NO S/S DOCUMENT)
• ASHRAE17 – Method of Testing for Capacity Rating of Thermostatic Refrigerant Expansion Valves (No S/S Document)
• ASME-B16.10 – Valves, Dimensions of Face-to-Face and End-to-End Standard for
• ASME-PTC25.3 – Safety and Relief Valves (See Notice of Withdrawal for Replacement Information)
• ASTM-F1370 – Valves, Pressure-Reducing, for Water Systems, Shipboard
• ASTM-F1783 – Performance of an Ice Rescuer – Level II
• ASTM-F1793 – Automatic Shut-off Valves (Also Known as Excess Flow Valves, EFV) for Air or Nitrogen Service
• AWWA-C500 – Value, Gate, 3 through 48 in. NPS, for Water and Sewage System (No S/S Document)
• AWWA-C504 – Valves, Butterfly, Rubber-Seated,, American Water Works Association Standard for
• API-STD-527 – SEAT TIGHTNESS OF PRESSURE RELIEF VALVES (NO S/S DOCUMENT)
• API-STD-593 – VALVES, DUCTILE IRON PLUG, FLANGED ENDS (NO S/S DOCUMENT)
• API-STD-594 – Wafer and Wafer-Lug Check Valves (No S/S Document)
• API-STD-598 – Valve Inspection and Testing
• API-STD-599 – STEEL AND DUCTILE IRON PLUG VALVES (NO S/S DOCUMENT)
• API-STD-600 – Steel Gate Valves-Flanged and Butt-Welding Ends (No S/S Document)
• API-STD-607 – Valve, Fire Test for Soft-Seated Quarter-Turn
• API-STD-609 – Lug and Wafer-Type Butterfly Valves (No S/S Document)
• API-SPEC-6FA – FIRE TEST FOR VALVES, SPECIFICATION FOR – FIRST EDITION (NO S/S DOCUMENT)
• API-STD-526 – STEEL, FLANGED, PRESSURE RELIEF VALVES (NO S/S DOCUMENT)
• AN6277 – VALVE – HYDRAULIC SHUTTLE, 3000 PSI (INTERNATIONAL THREAD TUBE FITTING OUTLET) (S/S BY MS28767)
• AN6278 – Valve Hydraulic-Shuttle, 3,000 PSI (Universal and Internal Thread Fitting Outlet)
• AN6287 – Valve – Air High Pressure 3/4 Hex
• AN6293 – Valve, 4-Way Rotary Selector, 3,000 PSI, Non-Interflow
• AN6294 – VALVE, 4-WAY ROTARY SELECTOR, 3000 PSI, INTERFLOW (NO S/S DOCUMENT)
• AND10067 – VALVE INSTALLATION – HYDRAULIC BLEEDER (STANDARD DIMENSIONS FOR) (NO S/S DOCUMENT)
• ANSI-A112.26.2 – PERFORMANCE REQUIREMENTS FOR WATER PRESSURE REDUCING VALVES FOR DOMESTIC WATER SUPPLY SYSTEMS (NO S/S DOCUMENT)
• ANSI-Z21.18 – GAS APPLIANCE, PRESSURE REGULATORS
• ANSI-Z21.22 – Boilers, Hot Water, Gas-Fired, Low-Pressure Steam (also Includes Addenda ANSI-Z21.13A-72)
• API-SPEC-6D – Valves, Pipeline (Gate, Plug, Ball, and Check Valves), Specification for
• AN6207 – Valve, Check, 1500 PSI, Hydraulic
• AN6211 – Valve – in Line Type 6 GPM Hydraulic Directional Control (No S/S Document)
• AN6213 – Valve – Radial Type 3-1/2 G.P.M. Hydraulic Directional Control (No S/S Document)
• AN6214 – Valve – Radial Type 6 GPM Hydraulic Directional Control (No S/S Document)
• AN6015 – Valve – High Pressure Oxygen Check (Style B) (No S/S Document)
• AN6016 – VALVE-HIGH PRESSURE OXYGEN CHECK, STYLE C (NO S/S DOCUMENT)
• AN6017 – VALVE – HIGH PRESSURE OXYGEN CHECK, STYLE D
• AN6018 – VALVE HIGH PRESSURE OXYGEN CHECK, STYLE E (NO S/S DOCUMENT)
• AN6024 – VALVE, FILLER LOW PRESSURE OXYGEN (FUTURE ACQUISITION USE MIL-PRF-7891)
• AN6204 – Valve, Hydraulic Bleeder
• QPL-32307 – Valve, Quarter Turn, Triple-Offset, Torque Seated, Shipboard Use (Replaced by the Qualified Products Database (QPD) see Notice 2 for Additional Information)
• QPL-81356 – VALVE, FUEL SYSTEM PRESSURIZATION AND VENT (NO S/S DOCUMENT)
• QPL-81940 – Valve, Sampling and Bleed, Hydraulic, Type II Systems (Replaced by the Qualified Products Database (QPD) see Notice 1 for Additional Information)
• MIL-HDBK-227 – Selection and Installation of Regulating and Control Valves for Naval Shipboard Use (No S/S Document)
• AN770 – COCK-DRAIN (SEE MS35784)
• AN771 – COCK – SCREW TYPE DRAIN (S/S BY MS 35782)
• AN812 – BODY-HIGH PRESSURE AIR VALVE (USE MS28889)
• AN813 – CAP, HIGH-PRESSURE AIR VALVE (S/S BY MS-20813)
• AN6012 – VALVE, HIGH PRESSURE OXYGEN LINE
• AN6014 – VALVE – HIGH PRESSURE OXYGEN CHECK, STYLE A
• QPL-24624 – Valves, Butterfly, Wafer and Lug Style, Shipboard Service (Replaced by the Qualified Products Database (QPD) see Notice 1 for Additional Information)
• QPL-24630 – Valves, Check, In-Line, for Hydraulic Fluid and Lubricating Oil Fluid (Replaced by the Qualified Products Database (QPD) see Notice 1 for Additional Information)
• QPL-24695 – Valve Hose Assembly, and Adapter, Vent and Test Hydraulic Service, General Specification for (Metric) (Replaced by the Qualified Products Database (QPD) see Notice 1 for Additional Information)
• QPL-25023 – Valve, Fuel Drain, Self-Locking (Replaced by the Qualified Products Database (QPD) see Notice 1 for Additional Information)
• QPL-25169 – VALVE, OXYGEN, AIRCRAFT, 300 PSIG CONVERTER, RELIEF
• QPL-25302 – VALVE, OXYGEN, AIRCRAFT, 70 PSIG CONVERTER, RELIEF
• QPL-25469 – Valves, Filler, Liquid Oxygen, Aircraft Type (Replaced by the Qualified Products Database (QPD) see Notice 1 for Additional Information)
• QPL-25675 – Valves, Check Miniature, Hydraulic, Aircraft and Missile (Replaced by the Qualified Products Database (QPD) see Notice 1 for Additional Information)
• QPL-25961 – Valve, Fill-Buildup-Vent, Liquid Oxygen Converter, CRU-50/A (Replaced by the Qualified Products Database (QPD) see Notice 1 for Additional Information)
• QPL-25962 – Valves, Liquid Oxygen Drain (Replaced by the Qualified Products Database (QPD) see Notice 1 for Additional Information)
• QPL-23937 – VALVES, GLOBE, ANGLE, FLANGED BONNET, QUICK CHANGE TRIM, MANUALLY OPERATED (SIZES 2 INCHES AND BELOW)
• QPL-23953 – Valve, Combined Vent Check for Submarine MBT Blow Lines (Replaced by the Qualified Products Database (QPD) See Notice 1 for Additional Information)
• QPL-24109 – Valves, Globe, Angle, Quick Change Cartridge Trim, High Pressure (H.P.) Hydraulic and Pneumatic (Sizes 1/8 – 1-1/4 Inches) (Replaced by the Qualified Products Database (QPD) see Notice 1 for Additional Information)
• QPL-24232 – VALVE, PNEUMATIC, 4 WAY – 2 POSITION AND 4 WAY – 3 POSITION, MANUALLY OPERATED (NO S/S DOCUMENT)
• QPL-24439 – Valves, Oxygen, Helium and Helium Oxygen Mixture, High Pressure for Gas Services (Replaced by the Qualified Products Database (QPD) see Notice 1 for Additional Information)
• QPL-24517 – Valve, Steam Pressure Reducing, Quiet Design
• QPL-22052 – Valve, Stop and Stop Check, Globe, Angle, and Y Pattern, Cast or Forged Carbon or Alloy Steel, Outside Screw and Yoke (Sizes 2-1/2 Inches and Larger) (Replaced by the Qualified Products Database (QPD) see Notice 1 for Additional Information)
• QPL-22133 – VALVE, BUTTERFLY, WORKING PRESSURES UP TO 200 P.S.I. 150 F. MAX. (FOR SHIPBOARD USE) (NO S/S DOCUMENT)
• QPL-22687 – VALVE, BALL, NAVAL SHIPBOARD, FOR AIR, NITROGEN, HELIUM OR HYDRAULIC SERVICE (SIZES 2-1/2 INCHES I.P.S. AND BELOW) (NO S/S DOCUMENT)
• QPL-23696 – VALVE, BALL, NAVAL SHIPBOARD, WATER SERVICE (NO S/S DOCUMENT)
• QPL-17462 – VALVE, SAFETY, BOILER (SHIPBOARD USE)
• QPL-17848 – Valve, Pressure Reducing, Steam Service (Replaced by the Qualified Products Database (QPD) see Notice 1 for Additional Information)
• QPL-18030 – VALVES, PRESSURE CONTROL, DIAPHRAGM OPERATED, EXTERNAL AIR PILOT ACTUATED, STEAM AND FRESH WATER SERVICE
• QPL-18110 – Valves, Gate, Cast or Forged Steel and Alloy Steel, Outside Screw and Yoke (Sizes 2-1/2 Inches and Larger)(Replaced by the Qualified Products Database (QPD) see Notice 1 for Additional Information)
• QPL-18916 – GOVERNORS, STEAM DRIVEN PUMP, PRESSURE REGULATING, NAVAL SHIPBOARD
• QPL-19067 – Valves, Check, Controllable, Hydraulic, Aircraft, Aircraft, Type II Systems (No S/S Document)
• QPL-19068 – Valves, Shuttle, Hydraulic, Aircraft, Type II Systems (No s/s document)
• QPL-19069 – Valves, Check, Hydraulic, Aircraft, Type II Systems (Replaced by the Qualified Products Database (QPD) see Notice 1 for Additional Information)
• QPL-19180 – Regulators, Pressure, Compressed Gas (No S/S Document)
• QPL-19772 – Valves, Temperature Regulating, Automatic, Naval Shipboard (Replaced by the Qualified Products Database (QPD) see Notice 1 for Additional Information)
• QPL-15358 – VALVE, AUTOMATIC REGULATING, (PRESSURE DIAPHRAGM ACTUATED AND CONTROLS, FOR HI-OCTANE GASOLINE SYSTEMS, 125 P.S.I. MAXIMUM W.P., 140 DEGREES F. MINIMUM)

12Next