Significance and Use 4.1 This guide establishes the minimum knowledge, skills, and abilities required to use a GPS/GNSS receiver to determine a position and collect navigational data in the wilderness. A person trained to this guide shall be endorsed for Basic Wilderness GPS/GNSS Use (GPS/GNSS-IW Endorsed). 4.1.1 Every person who is endorsed for Basic Wilderness GPS/GNSS Use shall have met the requirements of this guide. 4.2 This guide is only the first level of training for wilderness GPS/GNSS use, and only establishes the minimum knowledge, skills, and abilities required for a person to use a GPS/GNSS receiver to determine his or her location and collect navigational data in a wilderness environment. No other skills are included or implied. 4.3 In addition to meeting the requirements of this guide, a person endorsed for Basic Wilderness GPS/GNSS Use shall also be adequately trained to travel and work in a wilderness environment. 4.4 Depending on the regulations or policies of the AHJ, additional knowledge, skills, or abilities may be required before a person who meets the requirements in this guide may use a GPS/GNSS receiver in a wilderness environment. 4.4.1 Nothing in this guide precludes an AHJ from adding additional requirements for its own members. 4.5 This guide by itself is not a complete training document. It only specifies the knowledge, skills, and abilities required for an individual to be endorsed for Basic Wilderness GPS/GNSS Use. This guide may, however, be used in the development of, or as part of, a complete training document or program. 4.6 Though this guide establishes only minimum training, it does not imply that a person endorsed for Basic Wilderness GPS/GNSS Use is a “trainee,” “probationary,” or other similar term member of an organization. The AHJ is responsible for determining the requirements and qualifications for member or employee ratings. 4.7 This guide can be used to evaluate a document to determine if its content includes the necessary topics for training a person to be endorsed for Basic Wilderness GPS/GNSS Use. Likewise, the guide can be used to evaluate an existing training program to see if it meets the requirements of this guide. 4.8 The information in the following sections is not presented in any particular order and does not represent a training sequence. 4.9 Except where a physical skill or ability must be shown, the AHJ is responsible for determining the best way to evaluate a person’s knowledge, skill, and ability. This may be by written exam, oral exam, demonstration, or some combination of the three.Scope 1.1 This guide establishes the minimum knowledge, skills, and abilities required to use a GPS/GNSS2 receiver to determine one’s position, and collect location data, in the wilderness. 1.2 This guide applies to the use of a GPS/GNSS receiver on land, on and off roads, and on small bodies of water, wherever GPS/GNSS signals can be received. 1.3 This guide applies to the use of a GPS/GNSS receiver in disaster areas where local positioning aids or references may be lost or damaged. 1.4 This guide does not apply to the use of a GPS/GNSS receiver on large bodies of water, at sea, or in the air. 1.5 A person who meets the requirements in this guide is only prepared to operate a GPS/GNSS receiver to determine his or her location, and collect position and movement information, in a wilderness environment. 1.6 This guide does not imply that a GPS/GNSS receiver is a replacement for a map and compass. Use of the latter is strongly recommended as a backup for GPS/GNSS navigation. 1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

American National Standards Institute Inc.

Go to ASTM F3071 at ASTM.org

Add your thoughts about the standard.

1375 - Demolition Materials (549) 1377 - Cartridge and Propellant Actuated Devices and Components (524) 4720 - Hose and Flexible Tubing (552) 4730 - Hose, Pipe, Tube, Lubrication, and Railing Fittings (1823) 5120 - Hand Tools, Nonedged, Nonpowered (1124) 5305 - Screws (781) 5306 - Bolts (996) 5310 - Nuts and Washers (864) 5330 - Packing and Gasket Materials (583) 5340 - Hardware, Commercial (953) 5905 - Resistor (753) 5910 - Capacitors (783) 5930 - Switches (1012) 5935 - Connectors, Electrical (4357) 5940 - Lugs, Terminals, and Terminal Strips (564) 5945 - Relays and Solenoids (733) 5950 - Coils and Transformers (856) 5960 - Electron Tubes and Associated Hardware (1630) 5961 - Semiconductor Devices and Associated Hardware (707) 6145 - Wire and Cable, Electrical (1629) 6240 - Electric Lamps (662) 6505 - Drugs and Biologicals (1343) 6515 - Medical and Surgical Instruments, Equipment, and Supplies (1907) 6520 - Dental Instruments, Equipment, and Supplies (790) 6530 - Hospital Furniture, Equipment, Utensils, and Supplies (745) 6610 - Flight Instruments (540) 6625 - Electrical and Electronic Properties Measuring and Testing Instruments (1241) 6640 - Laboratory Equipment and Supplies (1187) 6810 - Chemicals (1114) 8010 - Paints, Dopes, Varnishes, and Related Products (2046) 8030 - Preservative and Sealing Compounds (554) 8140 - Ammunition and Nuclear Ordnance Boxes, Packages and Special Containers (797) 8305 - Textile Fabrics (910) 8415 - Clothing, Special Purpose (660) 8455 - Badges and Insignia (3093) 8915 - Fruits and Vegetables (531) 9330 - Plastics Fabricated Materials (759) FACR (1647) ISDA (1776) ISDD (786) ISDF (1827) ISDN (581) MISC (1045) PACK (539) SESS (581)
Aerospace Material (225) Aircraft Air Conditioning, Heating, and Pressurizing Equipment (334) Aircraft Hydraulic, Vacuum, and De-icing System Components (263) Ammunition, 75mm through 125mm (192) Ammunition, over 30mm up to 75mm (208) Ammunition, through 30mm (349) Analytical Chemistry (180) Bombs (192) Building (414) Bulk Explosives (261) Cartridge and Propellant Actuated Devices and Components (524) Consumer Product Evaluation (267) Copper (192) Demolition Materials (549) Electrical and Magnetic Conductor (162) Electronics (153) Environmental Toxicology (187) Fire Control Computing Sights and Devices (338) Fire Control Radar Equipment, except Airborne (197) Fuzes and Primers (454) Geotechnical Engineering (217) GUN (640) Land Mines (276) Medical Device and Implant (427) Military Chemical Agents (156) Miscellaneous Aircraft Accessories and Components (231) Miscellaneous Fire Control Equipment (216) Nondestructive Testing (246) Nonferrous Metal and Nonferrous Alloy (367) Nuclear Technology (274) Optical Sighting and Ranging Equipment (451) Paint and Related Coating (456) Parachutes; Aerial Pick Up, Delivery, Recovery Systems; and Cargo Tie Down Equipment (324) Petroleum (378) Plastic Pipe (248) Pyrotechnics (175) Road and Paving (177) Rockets, Rocket Ammunition and Rocket Components (368) Rubber (166) Security System Pedestrian and Walkway Safety (157) Specialized Test and Handling Equipment, Nuclear Ordnance (150) Sports and Recreation (316) Steel (908) Torpedos and Components, Inert (258) (621)