Significance and Use
4.1 The purpose of the sample may be to estimate properties of a larger population, such as a lot, pile or shipment, the percentage of some constituent, the fraction of the items that fail to meet (or meet) a specified requirement, the average characteristic or quality of an item, the total weight of the shipment, or the probable maximum or minimum content of, say, some chemical.
4.2 The purpose may be the rational disposition of a lot or shipment without the intermediate step of the formation of an estimate.
4.3 The purpose may be to provide aid toward rational action concerning the production process that generated the lot, pile or shipment.
4.4 Whatever the purpose of the sample, adhering to the principles of probability sampling will allow the uncertainties, such as bias and variance of estimates or the risks of the rational disposition or action, to be calculated objectively and validly from the theory of combinatorial probabilities. This assumes, of course, that the sampling operations themselves were carried out properly, as well. Proper sampling requires that any random numbers were generated properly, the units to be sampled from were correctly identified, located, and drawn, and the measurements were made with measurement error at a level not exceeding the required purposes.
4.5 Determination of bias and variance and of risks can be calculated when the selection was only partially determined by random numbers and a frame, but they then require suppositions and assumptions which may be more or less mistaken or require additional data which may introduce experimental error.
Abstract
This practice is primarily a statement of principles for the guidance of ASTM technical committees and others in the preparation of a sampling plan for a specific material. The purpose of the sample may be to estimate properties of a larger population, such as a lot, pile or shipment, the percentage of some constituent, the fraction of the items that fail to meet (or meet) a specified requirement, the average characteristic or quality of an item, the total weight of the shipment, or the probable maximum or minimum content of some chemical. A probability sampling plan will possess an objective procedure for the selection of the sample with the use of random numbers and a definite formula for the estimate and standard error of any estimate.
Scope
1.1 This guide is primarily a statement of principles for the guidance of ASTM technical committees and others in the preparation of a sampling plan for a specific material.
1.2 A system of units is not specified in this standard.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.